ESPixelStick - E1.3...
 
Notifications
Clear all

ESPixelStick - E1.31 WiFi Pixel Controller

948 Posts
178 Users
0 Reactions
503.7 K Views
Posts: 57
(@aclarksr)
Trusted Member
Joined: 13 years ago

So I ordered two BOMs from Digikey and two from Arrow. Digikey BOM $5.38 each.
Arrow BOM $4.56. The kicker is the $9 shipping for Digikey order. Tax I assume is inevitable. Both have items that either are on back order or shipped from Europe which delay parts arrival. If I can't find these in my personal supply I'll hit up my local electronics supply in the morning for the items with delayed arrival. Good to hear that these are already proving out though.

Sent from my iPhone using Tapatalk


Reply
Posts: 57
(@aclarksr)
Trusted Member
Joined: 13 years ago
aclarksr wrote:So I ordered two BOMs from Digikey and two from Arrow. Digikey BOM $5.38 each.
Arrow BOM $4.56. The kicker is the $9 shipping for Digikey order. Tax I assume is inevitable. Both have items that either are on back order or shipped from Europe which delay parts arrival. If I can't find these in my personal supply I'll hit up my local electronics supply in the morning for the items with delayed arrival. Good to hear that these are already proving out though.

Sent from my iPhone using Tapatalk

Sorry I think I jumped threads.

Sent from my iPhone using Tapatalk


Reply
Posts: 1387
 kev
(@kev)
Noble Member
Joined: 12 years ago
sporadic wrote:I'll replace it. Would like to do some analysis on it though to see what the issue is as it's a first. PM me your address and I'll get one out to you tomorrow.

Sent from my R1 HD using Tapatalk

PM sent. Thanks.


Reply
Posts: 2
(@bitburner)
New Member
Joined: 12 years ago

If you could make your Amazon.com ESPixelStick offering also available to Canadians for ordering (Amazon.ca) that would be awesome. From what I see, its fulfilled by amazon, so should be a breeze.


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
BitBurner wrote:If you could make your Amazon.com ESPixelStick offering also available to Canadians for ordering (Amazon.ca) that would be awesome. From what I see, its fulfilled by amazon, so should be a breeze.

I looked into that, but have to ship to their FBA center in Canada and estimate sales in Canada to not get hit with long term fees. Maybe in the future.


Reply
Posts: 22
(@zero9r)
Eminent Member
Joined: 10 years ago

I'm sure if they where on Amazon.ca it would make it easier for us to order, so we would order more.


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago

3.0 Release Candidate 1 is now available here. It fixes a form validation issue when configuring your hostname, adds validation to the other wireless configuration items, and fixes reboot loop issues with AP fallback is enabled. Issues and feedback are always appreciated. ESPixelStick hardware is available via Amazon. I'm still working on an easy method for international orders, but feel free to PM me if you're interested in ordering them.
thanks!
-shelby


Reply
Posts: 23
(@auflyer)
Eminent Member
Joined: 11 years ago

I have a ESPIXELSTICK V2 connected and can open it's webpage. I've got 25 ws2811 pixels attached and programmed in Xlights onto a FPP with an E682. I can't seem to get the channels right. How do I configure the E682 for the Wlan connection to work with the Espixelstick? I've tried test mode in E682 and FPP with no luck.

I had a 16 string x 25 pixel mega tree last year with the E682 and FPP which worked perfectly. I think the problem is in my universe/channel configuration. Other than that, is there anything on the wireless side I need to configure.

Thanks!


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago
auflyer wrote:I have a ESPIXELSTICK V2 connected and can open it's webpage. I've got 25 ws2811 pixels attached and programmed in Xlights onto a FPP with an E682. I can't seem to get the channels right. How do I configure the E682 for the Wlan connection to work with the Espixelstick? I've tried test mode in E682 and FPP with no luck.

I had a 16 string x 25 pixel mega tree last year with the E682 and FPP which worked perfectly. I think the problem is in my universe/channel configuration. Other than that, is there anything on the wireless side I need to configure.

Thanks!

Sounds like you're missing a few key concepts. The ESP is a device that sits on your network just like any other sACN controller. The FPP will output data out one network interface, usually eth0. That interface is typically connected to a switch and then all other controllers connect to that switch. In the case of a wifi controller you'll need to have an access point connected to that switch. This creates a wireless segment to the network. The ESP associates to the access point. The access point is the bridge to the wired LAN. (Where your 682 is connected) The wired lan is what's connected to the FPP.

There are some tricks to make the pi do some network bridging and act as an ad-hoc access point but that's generally not a good idea as you're putting a lot of unnecessary burden onto your pi. It's best to let discrete components do the jobs they're designed for.

Sent from my iPhone using Tapatalk


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
auflyer wrote:I have a ESPIXELSTICK V2 connected and can open it's webpage. I've got 25 ws2811 pixels attached and programmed in Xlights onto a FPP with an E682. I can't seem to get the channels right. How do I configure the E682 for the Wlan connection to work with the Espixelstick? I've tried test mode in E682 and FPP with no luck.

I had a 16 string x 25 pixel mega tree last year with the E682 and FPP which worked perfectly. I think the problem is in my universe/channel configuration. Other than that, is there anything on the wireless side I need to configure.

Thanks!

Little confused with the mention of the e682 and wlan. You setup the ESPixelStick as it's own controller in xLights and FPP. It doesn't talk to the e682.

Sent from my R1 HD using Tapatalk


Reply
Page 63 / 95
Share: