amps wrote:Quick question. I plan on using one Espixelstick per window and they'll each drive 150 12v pixels (100 frame + 50 wreath). Worst case scenario, that's 9A of current (though I know the 12v pixels are lower current and I'l probably power inject at the end of the string).If I replace the 3A fuse with a 10A, will the Espixelstick drive all 150 reliably?
Is this a strip or nodes 9A seems like a lot to me for just 150 pixels.
MrSmoofy wrote:Is this a strip or nodes 9A seems like a lot to me for just 150 pixels.
60ma per node (20ma per color). 0.06 * 150 = 9. From what I've read, the 12v versions usually draw much less than that but I'd rather plan for the worst case.
Most of us inject power every 50 nodes so that would bring you back to about 3A from the ESP and the other 6A injected along the string
amps wrote:Quick question. I plan on using one Espixelstick per window and they'll each drive 150 12v pixels (100 frame + 50 wreath). Worst case scenario, that's 9A of current (though I know the 12v pixels are lower current and I'l probably power inject at the end of the string).If I replace the 3A fuse with a 10A, will the Espixelstick drive all 150 reliably?
amps wrote:60ma per node (20ma per color). 0.06 * 150 = 9. From what I've read, the 12v versions usually draw much less than that but I'd rather plan for the worst case.
I think you'll find that your pixels will draw much less than that. The traces are designed for 10A max capacity, but I'd really look at external power distribution if going that high. It depends on how many LEDs and of what type in each node. For instance, 100 Pixabulbs with 2x 5050's will draw under 2.5 amps. I run my whole show off two 30A power supplies. The longest run in my show last year was 111 Pixabulbs, with no power injection and a 3A fuse. No issues at all with them.
I'd be in for 10
Tory
I did not check the schematic, but on the rev 1 version I actually powered the esp via power injection 25 pixels away from the esp. In essence, the fuse protected the ESP from issues out in the string.
Livermore-Dad wrote:I'd be in for 10Tory
Group buy is open here - http://doityourselfchristmas.com/forums/showthread.php?43773-ESPixelStick-V2-Group-Buy-E1-31-WiFi-Pixel-Controller-kit
I'm planning my first mini pixel tree with the ESPixel Stick. From what I vaguely understand I can do 170 pixels multicast or 4x170 pixels unicast, but it will have to be one string folded in a zig-zag into multiple strands. I want to be sure that whatever I build is EASILY compatible with Nutcracker, and they seem to recommend folding on the controller.
TLDR
Can I "fold" a mega tree on ESPixel Stick to make it easily compatible with Nutcracker?
oceanwanderlust wrote:I'm planning my first mini pixel tree with the ESPixel Stick. From what I vaguely understand I can do 170 pixels multicast or 4x170 pixels unicast, but it will have to be one string folded in a zig-zag into multiple strands. I want to be sure that whatever I build is EASILY compatible with Nutcracker, and they seem to recommend folding on the controller.TLDR
Can I "fold" a mega tree on ESPixel Stick to make it easily compatible with Nutcracker?
I don't have zig-zag support at the controller yet, but it's high on my list of things to do for this season.

