ESPixelPops and fli...
 
Notifications
Clear all

ESPixelPops and flicker issues

15 Posts
9 Users
0 Reactions
2,829 Views
Posts: 7
Topic starter
(@jfunk138)
Active Member
Joined: 6 years ago

Resurrecting this thread in case it helps anyone else... I replaced the 2N7000 (ON SEMICONDUCTOR) from Arrow I used, with ZVN3306A from Digi-Key and the cold weather flickering is FINALLY gone.


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Wow. THAT is a very good thing to know.
I will be updating the wiki with this information !

jfunk138 wrote:Resurrecting this thread in case it helps anyone else... I replaced the 2N7000 (ON SEMICONDUCTOR) from Arrow I used, with ZVN3306A from Digi-Key and the cold weather flickering is FINALLY gone.

Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

Does anyone have any idea why that made a difference? I don't.


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago
P. Short wrote:Does anyone have any idea why that made a difference? I don't.

I'm a thinking a poor solder connection was cured as these are a diy build.


Reply
Posts: 418
(@richienorthcott)
Reputable Member
Joined: 7 years ago

I have a similar issue with some of my props. Normally I find the cause is poor connections, sometimes contact cleaner can help on the plugs. I don't think it's related to the controller. Agree it's super annoying! Normally at full white it's not noticeable but when dimming then all sorts of weird stuff happens. The freezing cold weather we are having in the UK at the moment is not helping the cause.


Reply
Page 3 / 3
Share: