DMX channels overla...
 
Notifications
Clear all

DMX channels overlapping on E681

3 Posts
2 Users
0 Reactions
815 Views
Davor
Posts: 221
Topic starter
(@davor)
Reputable Member
Joined: 16 years ago
[#55237]

Below is my controller's pixel configuration:

E1.31 Packet Statistics:

                       Socket s1    Socket s2    Socket s3    Socket s4
 Universe Number             1            2            3            4 
Packets Received             0            0            0            0 
 Sequence Errors             0            0            0            0 
 Invalid Packets             0            0            0            0 

Pixel String Configuration:

Cluster# Strings  Chip   Pixels  Grp  Str Len  RGB DMX  Address Range  Reverse Zigs Null Pixels  Refresh Gamma
    1       2    1804(F)  050    001   0050    RGB s1-001 thru s1-300   NNNN   0000   0-0-0-0     0245         
    2       2    1804(F)  100    001   0100    RGB s2-001 thru s3-090   NNNN   0050   0-0-0-0     0123         
    3       2    1804(F)  100    001   0100    RGB s3-001 thru s4-090   NNNN   0050   0-0-0-0     0123         
    4       1    1804(F)  100    001   0100    RGB s4-001 thru s4-300   NNNN   0050   0-0-0-0     0123         

I cannot figure out why the DMX channels on cluster 3 and 4 are overlapping with the clusters above them. I have 600 pixels attached and this controller is supposed to be able to handle 680. Does anyone know what I'm doing wrong here?


2 Replies
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago
Davor wrote:Below is my controller's pixel configuration:

E1.31 Packet Statistics:

                       Socket s1    Socket s2    Socket s3    Socket s4
 Universe Number             1            2            3            4 
Packets Received             0            0            0            0 
 Sequence Errors             0            0            0            0 
 Invalid Packets             0            0            0            0 

Pixel String Configuration:

Cluster# Strings  Chip   Pixels  Grp  Str Len  RGB DMX  Address Range  Reverse Zigs Null Pixels  Refresh Gamma
    1       2    1804(F)  050    001   0050    RGB s1-001 thru s1-300   NNNN   0000   0-0-0-0     0245         
    2       2    1804(F)  100    001   0100    RGB s2-001 thru s3-090   NNNN   0050   0-0-0-0     0123         
    3       2    1804(F)  100    001   0100    RGB s3-001 thru s4-090   NNNN   0050   0-0-0-0     0123         
    4       1    1804(F)  100    001   0100    RGB s4-001 thru s4-300   NNNN   0050   0-0-0-0     0123         

I cannot figure out why the DMX channels on cluster 3 and 4 are overlapping with the clusters above them. I have 600 pixels attached and this controller is supposed to be able to handle 680. Does anyone know what I'm doing wrong here?

This is a 4 universe controller with 170 pixels per cluster with a group setting of 1 is max you can set .
I cannot recall if you could edit the start channels and get a successful working output or not .


Reply
Davor
Posts: 221
Topic starter
(@davor)
Reputable Member
Joined: 16 years ago
angus40 wrote:This is a 4 universe controller with 170 pixels per cluster with a group setting of 1 is max you can set .

Ah, I see. That makes sense. So even though I didn't hit the max limit on the controller, I hit the max limit per cluster. What threw me off was instead of dropping off the 30 pixels over the cluster limit, the DMX channels continued onto the next socket.


Reply
Share: