ESPixel Pops laggin...
 
Notifications
Clear all

ESPixel Pops lagging

14 Posts
6 Users
0 Reactions
3,801 Views
DrNeutron
Posts: 2016
(@drneutron)
Noble Member
Joined: 14 years ago
CUTTHEMUSIC wrote:I have a edgerouterx setup as a switch. What is the purpose of adding a router in between the pc and nano station? I have to check but I think I’m running 3.? esp firmware. I set them up about 3 months ago. I have logged in and I see errors that appear to be 5-10% of packets received. Not sure if that is acceptable.

So you added an edgerouterX this year? Is there a possibility that there is a setting in the router that limits multicast traffic?
That is why i suggested going back to how you had it, just to simply test (minus using the wifi on the linksys).
The only reason I keep the router in my mix is for DHCP.


Reply
CUTTHEMUSIC
Posts: 51
Topic starter
(@cutthemusic)
Trusted Member
Joined: 14 years ago

I removed the router from the equation when I learned the nano would work without it. It was basically acting as a switch. My esp are setup with static ips so I don’t need a dhcp server.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

Your symptoms are indicative of WiFi congestion. Have you run a wifi scan to ensure you're using a clear channel?


Reply
CUTTHEMUSIC
Posts: 51
Topic starter
(@cutthemusic)
Trusted Member
Joined: 14 years ago
Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

use a WiFi scanning app on a laptop and slowly walk around the yard to observe what else is going on in the air. Acrylic WiFi is a good app for it.


Reply
Page 2 / 3
Share: