ESPixel GECE Info T...
 
Notifications
Clear all

ESPixel GECE Info Thread

123 Posts
28 Users
0 Reactions
51.4 K Views
Posts: 911
Topic starter
(@madsci1016)
Noble Member
Joined: 12 years ago
Stormyblade wrote:For those of us that missed out on the group buy, is there a way to order our own boards? I think I saw a reference to seeed on the github page, but I'm not familiar with that name (or site)? I saw the BOM so that's easy enough, but the boards...??

Thanks!

You haven'e missed the group buy, it hasn't happened yet. But since I released my design to the public, some people have went off and made there own boards.


Reply
Posts: 691
(@stormyblade)
Honorable Member
Joined: 12 years ago

Ah...okay...thought I was reading through this thread and the GB was closed. Unfortunately for me, when I went into the group buy thread, I can't post, reply, or anything...I don't think I'm "eligible" for group buys on this site. However, is there a specific site to go to when ordering the boards? I tried uploading the file to OshPark.com and it says there is an error.


Reply
Posts: 8
(@flyrockets)
Active Member
Joined: 11 years ago

I was impatient and got my batch through seeed studio, had no issues with the file, just shipping delays.


Reply
Posts: 8
(@flyrockets)
Active Member
Joined: 11 years ago
ukewarrior wrote:Very nicely done !
Be sure to share how well they work too.

Video of 9 controllers in unicast, first sequence I wrote too, need a lot more time in xlights to become efficient! Feedback appreciated.

More to come, big plans for next year!!!!!


Reply
Posts: 911
Topic starter
(@madsci1016)
Noble Member
Joined: 12 years ago

Cool!

Any feedback on the design or building the controllers? Pretty nice not having any data wires running about isn't it?


Reply
Posts: 8
(@flyrockets)
Active Member
Joined: 11 years ago

Yes no wires is fantastic! No issues with design from my end. Only build issue I ran into was when I tried to load firmware on newest Arduino build had to downgrade (went back and read ESPixel forum saw others had same issues). Also initially ran test of 3 on really cheap separate router worked great but cheap router could not handle 9, troubleshot for two hours before I realized it was a router issue. Currently running off my guest network on my main router (nighthawk). Show is also running off a PiPlayer which is also working great. Had one field failure due to rushing at my end.... water encroachment that froze up but once I popped it open and dried it it was fine, I will go through and RTV all after end of season. Thanks again for all your work with the design!!! Merry Christmas!! .

image

Reply
Posts: 691
(@stormyblade)
Honorable Member
Joined: 12 years ago

Flyrockets, very nice to hear everything is working as advertised. I had my own water encroachment disastercthis year. I am looking forward to using ESPixel & ESPGECE boards perhaps next year.


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago
Reply
Posts: 339
(@heldwhat-christmas)
Reputable Member
Joined: 15 years ago

Is the only thing different about the GECE version the form factor?
Assuming I could use one of these for regular WS2811 pixels, I'm thinking of trying one of these inside my 10W floods, and the regular pixel stick is too long. Would be nice to just have a 12v pig tail hanging out and essentially a WiFi flood light.
The inside of the enclosure is about 2.9"x1.9"x1" - would these fit in there? I don't have any CAD viewer software to check the files Bill posted.


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

I think you want the ESP pixel stick for your application.
This application is very specific for the GECE pixels.

Heldwhat Christmas wrote:Is the only thing different about the GECE version the form factor?
Assuming I could use one of these for regular WS2811 pixels, I'm thinking of trying one of these inside my 10W floods, and the regular pixel stick is too long. Would be nice to just have a 12v pig tail hanging out and essentially a WiFi flood light.
The inside of the enclosure is about 2.9"x1.9"x1" - would these fit in there? I don't have any CAD viewer software to check the files Bill posted.

Reply
Page 5 / 13
Share: