What is the typical range on these. Looking to use them on my roof. Depends on the router I suppose...
Robo wrote:What is the typical range on these. Looking to use them on my roof. Depends on the router I suppose...
You're right on the money. Totally depends on the AP you're going to use. A lot of us that use them use Ubiquiti equipment for our show network which has a much better range, but it's not omni-directional so you have to be careful where and how you place the APs so that your elements will receive a signal.
I, like Zeph, have several boxes of the older GECE pixels, 25 count (Not the icicles, but the C9 form)...These are not Itwinkle branded. They have no Blu Tooth or wifi compatibility. They were controlled by a remote that cycled through the different effects. Does this board work with these older models of GECE? If so, I'm in. If not, back to the drawing board 🙂
mrbob135 wrote:I, like Zeph, have several boxes of the older GECE pixels, 25 count (Not the icicles, but the C9 form)...These are not Itwinkle branded. They have no Blu Tooth or wifi compatibility. They were controlled by a remote that cycled through the different effects. Does this board work with these older models of GECE? If so, I'm in. If not, back to the drawing board 🙂
More than likely the answer is yes. Do you have to boxes they came in and can post a picture. Otherwise, do you have a picture of the controller on the strings? All of my string are older 50 and 35 ct GE Color Effects. Not iTwinkle, not Bluetooth or WiFi, just a cheap controller that cycles the strings through 14 different modes. These controllers work great on them.
mrbob135 wrote:I, like Zeph, have several boxes of the older GECE pixels, 25 count (Not the icicles, but the C9 form)...These are not Itwinkle branded. They have no Blu Tooth or wifi compatibility. They were controlled by a remote that cycled through the different effects. Does this board work with these older models of GECE? If so, I'm in. If not, back to the drawing board 🙂
As long as they are the G35 style GECE, they will work. I'm not aware of a C9 GECE. The existing controller WiFi/Bluetooth/original remote control is not material to this project, only the case which will be re-used as the enclosure for these new boards.
