ESPixel GECE Info T...
 
Notifications
Clear all

ESPixel GECE Info Thread

123 Posts
28 Users
0 Reactions
51.4 K Views
Posts: 911
Topic starter
(@madsci1016)
Noble Member
Joined: 12 years ago
Skunberg wrote:How many can be used at one time?

Good question. I don't think we have an answer on this yet, and there main not be a defined answer at all. Wifi capability is mostly dependent on your unique environment. How many other access points are there in your area? How far away is your AP? Is it line of site? All those questions will probably drive the max number answer.

I've tested 3 now, spoardic has tested 6-8ish I believe, I will be testing 10 on my Christmas Display. I have a beta tester who's buying 25 beta units off of me that will be testing most all of them at once. That will give us some better insight.


Reply
Posts: 22
(@mrbob135)
Eminent Member
Joined: 14 years ago

Will these work with the older GECE pixels that had no wifi capabilities?


Reply
Posts: 911
Topic starter
(@madsci1016)
Noble Member
Joined: 12 years ago
mrbob135 wrote:Will these work with the older GECE pixels that had no wifi capabilities?

Yes. I'm using them with the Itwinkle branded Bluetooth version.

Sent from my Nexus 5X using Tapatalk


Reply
Posts: 2048
(@scootchu)
Noble Member
Joined: 17 years ago

Bill, would you mind releasing the schematic? I'd like to cobble something together on a bread board or a pcb board. I want to see if I could make it work in my north pole lights. Are you using Sporadics whole ESP pixel stick code. And if I were to have 4-6 individual pixels could they have their own board but still be channels 1-4 or 6 in the same universe like you show with the Renards?

Sent from my XT1254 using Tapatalk


Reply
Posts: 911
Topic starter
(@madsci1016)
Noble Member
Joined: 12 years ago
scootchu wrote:Bill, would you mind releasing the schematic? I'd like to cobble something together on a bread board or a pcb board. I want to see if I could make it work in my north pole lights. Are you using Sporadics whole ESP pixel stick code. And if I were to have 4-6 individual pixels could they have their own board but still be channels 1-4 or 6 in the same universe like you show with the Renards?

Sent from my XT1254 using Tapatalk

It's on my github.

https://github.com/madsci1016/ESPixel

Yes using Sporadics firmware.

Yes they can be same universe, same channel. But i'd use multicast mode so it wouldn't have to send packets to each one.


Reply
Page 4 / 25
Share: