ESPixel GECE Info T...
 
Notifications
Clear all

ESPixel GECE Info Thread

123 Posts
28 Users
0 Reactions
51.3 K Views
Barnabybear
Posts: 1583
(@barnabybear)
Noble Member
Joined: 15 years ago

Cool project, can't wait to see some pics.


Reply
Posts: 50
(@pcpackrat)
Trusted Member
Joined: 11 years ago

I cant seem to get the new ESPixelStick to compile. I'm getting the following error:

Arduino: 1.6.5 (Windows 8.1), Board: "Generic ESP8266 Module, Serial, 160 MHz, 40MHz, DIO, 115200, 512K (64K SPIFFS), ck"

Build options changed, rebuilding all

EFUpdate.cpp: In member function 'bool EFUpdate::process(uint8_t*, size_t)':
EFUpdate.cpp:68: error: 'class fs::FS' has no member named 'end'
SPIFFS.end();
^
'class fs::FS' has no member named 'end'


Reply
Posts: 50
(@pcpackrat)
Trusted Member
Joined: 11 years ago

OK I gave up on 2.0 and went back to v1.4.

I had all mine flashed but I have one that is swapping red and blue. So I reflashed it and it's still doing it. Is there a way to completely wipe the ESp8266? Becasue even after flashing it, it still was trying to connect to the old wifi SSID that isn't anywhere in the code.

So to fix all this I installed Python and used the esptool.py script to erase the flash.

esptool.py --port COM3 erase_flash

And then flashed it again. All good.

-PCP


Reply
Posts: 255
(@joej85)
Reputable Member
Joined: 15 years ago

I have about 15 of the ESPixelGECE boards running Bill's firmware. I have a megatree created using GECE's and these modules that is working great.

Today, my power went out for awhile, and for some reason, all of my ESPixelGECE strings lost their settings for SSID/password. I had to connect to each one individually and re-enter the SSID/password to get them working again. I'm using static addresses and multiple universes and all those settings remained intact, just the SSID/password were lost.

Prior to today, the strings had been remembering all parameters when powered off.

Has this happened to anyone before?

Another possibly related question, should I change to the ESPixel V2.0 firmware for these boards?

Thanks!


Reply
duramadmax
Posts: 904
(@duramadmax)
Noble Member
Joined: 16 years ago

I have had this happen also...lose the SSID settings.

Oh and I have tried to put V2.0 on mine and so far no go.....must be missing something... Can load V1.4 all day long


Reply
Page 23 / 25
Share: