Resurrecting an old thread, but do y'all have those connectors still? I need 10.
I got the LED keeper and it worked great. Had a bit of an issue testing on a known good string but it was the type that has 3 wires going to every LED...
Hope I can find it. It's pretty much glued to my pvc board as a face outline.
Do you have routes for both networks in your routing table? Your 192.168.0.1 router needs to know how to get to 192.168.2.x This is usually a route ...
They are driving all GECE strings and I have a feeling that may be the issue because they are SLOOOOOW. I tried multicast but that was worse. I will...
How many can you run at a time on 1 SSID? I'm trying to figure out if its my access point or a limitation but this year I have 9 and every once in a ...
I am trying to implement this and have the commands working in Display Setup but when I go to add the RDS effect to a sequence it gives an error: 11/...
jchuchla wrote:Furthermore I'd avoid it because it doesn't work with multicast sACN. Running unicast sACN over WiFi isn't best practice. I thought ...
Maybe gentle application of a ton of heat and bend it? It doesn't need to pass wires internally. Actually with the 90 on there, you only need a smal...
Sounds like if it works with 2.1 then it is not a connection issue. All I got is to make sure you patched your elements to the controller. I was thi...
I bought these and your first link appears to be the same. These work great. Turned out I already had the ones with higher memory though so now I h...
Me too... Running derv build #510 and its loading again for me. Thanks,
Re: GETS on espixel controller slow by 400+ miliseconds I chopped my 61 pixel string in half and added another controller. I guess when you go the D...
