E682 Maximum Output
 
Notifications
Clear all

E682 Maximum Output

9 Posts
6 Users
0 Reactions
1,985 Views
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

If you mean by a "splitter" - a switch, then yes.

(Remember your "Router" is usually 3 devices in one today. 1) The router itself. 2) A WiFi access point. 3) A switch, usually 4 or 5 ports.)


Reply
Posts: 15
Topic starter
(@joeyw1986)
Eminent Member
Joined: 6 years ago
algerdes wrote:If you mean by a "splitter" - a switch, then yes.

(Remember your "Router" is usually 3 devices in one today. 1) The router itself. 2) A WiFi access point. 3) A switch, usually 4 or 5 ports.)

Perfect thank you so much that is what I meant haha. I have heard/called them so many things over the years I never can keep it straight. Well then I will figure out which way I want to go this weekend and go from there. Any reason you would suggest not getting a Kulp instead of a 2nd E682? Similar pricing and the Kulp will allow much greater expansion in the future so that is a big plus for me. Also with only one controller right now might be a good time to switch over, but interested in any thoughts you might have.


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

I may not be the one to ask for an opinion of one over the other. I have 7 E682s, and at least one each of all the Kulp boards (and I do mean "at least"!) Add to that the 18 Falcon boards and you get the idea. They are all great and do what they do so well.

The E682s are in our older mega-trees (6) and have worked flawlessly for many years. Their limitation is the 12 universes (unicast). They also do not have some of the fancy combinations of pixel types and props. Once again, they are rock solid in what they do.

The Falcons are still my go-to for building new props and groups of props. These join the system being told what to do by RPi units running FPP. Great for output flexibility with their virtual strings.

We turn to the Kulps when we have stand-a-lone props or prop groups. Having the FPP as part of the controller is a blessing in many ways. Also, the Kulps have some configurations on the same card that are daughter cards on the Falcons. You can get the same results in both, but easier with some of the Kulps.

In a lot of cases it comes down to cost, or physical size, or ... Very individual choice! All are well worth consideration.


Reply
Posts: 691
(@stormyblade)
Honorable Member
Joined: 12 years ago
algerdes wrote:I may not be the one to ask for an opinion of one over the other. I have 7 E682s, and at least one each of all the Kulp boards (and I do mean "at least"!) Add to that the 18 Falcon boards and you get the idea. They are all great and do what they do so well.

The E682s are in our older mega-trees (6) and have worked flawlessly for many years. Their limitation is the 12 universes (unicast). They also do not have some of the fancy combinations of pixel types and props. Once again, they are rock solid in what they do.

The Falcons are still my go-to for building new props and groups of props. These join the system being told what to do by RPi units running FPP. Great for output flexibility with their virtual strings.

We turn to the Kulps when we have stand-a-lone props or prop groups. Having the FPP as part of the controller is a blessing in many ways. Also, the Kulps have some configurations on the same card that are daughter cards on the Falcons. You can get the same results in both, but easier with some of the Kulps.

In a lot of cases it comes down to cost, or physical size, or ... Very individual choice! All are well worth consideration.

I'm with this guy - I've got 3 E682s in my display, plus 2 BBBs that have Octoscroller capes. All of them tie via ethernet cable to an unmanaged ethernet switch, and my Rasp Pi also ties in to the same switch and is the Master device. It all works very well together, so I have no reason to buy any other devices. Plenty of people here have had tremendous success with the Kulp boards/devices, so you can't go wrong with them if that's your choice.


Reply
Page 2 / 2
Share: