Notifications
Clear all

E682 issues

33 Posts
9 Users
0 Reactions
10.7 K Views
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Are you using a PC ? if yes a patch cable is required for direct connecting not a crossover .


Reply
ebrady
Posts: 670
Topic starter
(@ebrady)
Prominent Member
Joined: 17 years ago

It is not going directly to PC, but through a Linksys Router that my PC is hardwired to. I changed to a different router and web performance improved, so the router must have been aggravating the issue. However, it still might might do it 1 out of 10 times.

The stuck pixels are still a mystery. I am using all 16 outputs, with a single 49 pixel string per output. I cycled power 15 to 20 times today, there was never an instance where at least one pixel would get stuck on, sometimes 3 to 4. It looks like the pixels in the string are not enumerated correctly at start up.

Ed


Reply
Macrosill
Posts: 9739
(@macrosill)
Member
Joined: 19 years ago

Are you using a completely seperate wired network for your display or are you just using a different subnet for the display on the same network that you use for interent access.

I suffered similar poor network performance when trying to view the E68x configuration page when there was a inadvertant link between my internet LAN and my display LAN. Once I comletely physically seperated the 2 networks all network performance issues went away.

On my laptop I use the wifi card for internet access and wired adapter for the display when I need to configure or monitor the display. Otherwise I let the display system stay isolated and do its thing. I can switch to the dsplay wifi if I need to while outside and doing testing.


Reply
ebrady
Posts: 670
Topic starter
(@ebrady)
Prominent Member
Joined: 17 years ago

They are on a bridged wireless subnet, changing the router has seemed to have cleared up issue #1 with the web page.

Not having much luck with the pixels randomly stuck on. (#2). The pixels that get stuck are random, but at least one will get stuck on every time I power up the controller. Real head scratcher, all pixels after the ones that are stuck on work normally. I would figure if I have a failed pixel, it would stay stuck all of the time and not change around randomly.

Worst case, I guess I could just live with the stuck pixels (not crazy about that idea), but this would mean I need to kill power to the pixel controller at the end of the show every day and turn it back on the next day.


Reply
kayjay
Posts: 88
(@kayjay)
Estimable Member
Joined: 16 years ago
Reply
Page 2 / 7
Share: