Notifications
Clear all

E682 Data Issue

29 Posts
12 Users
0 Reactions
7,642 Views
Posts: 376
(@k-state-fan)
Reputable Member
Joined: 16 years ago
chrisuk wrote:Thanks for reply - When you say screenshot do you mean the configuration page?

I started reading something about null pixels? I don't think i use them not sure what it does ? Or how it works?

Thanks for any help

The null pixel just receives the data and transmits it out. The data stream for the pixels can not travel very far.


Reply
Tegbert
Posts: 276
(@tegbert)
Reputable Member
Joined: 13 years ago
chrisuk wrote:Thanks for reply - When you say screenshot do you mean the configuration page?

I started reading something about null pixels? I don't think i use them not sure what it does ? Or how it works?

Thanks for any help

Null pixel is a single pixel you would put in between the 682 and your pixel strand start if you are going long distances. So if you have 30 feet to your first pixel you would insert the single pixel at about 15 feet or so. And also check in the 682 configuration page that you have a null pixel on that ouput.

These pixels will not light when you have it configured right they just help send data down the stream.

Travis


Reply
Tegbert
Posts: 276
(@tegbert)
Reputable Member
Joined: 13 years ago

And yes a screeshot of your e682 webpage configuration page.

Travis


Reply
Posts: 9
Topic starter
(@chrisuk)
Active Member
Joined: 12 years ago

Thanks for all the replied. See attached screenshot.

San

Reply
Posts: 352
(@pmscientist)
Reputable Member
Joined: 16 years ago
K-State Fan wrote:The null pixel just receives the data and transmits it out. The data stream for the pixels can not travel very far.

Null pixels are a workaround for transmission line issues. Since the E682 incorporates the necessary termination resistors, there really shouldn't be a need for them at 15 meters. especially with shielded twisted pair.


Reply
Page 2 / 6
Share: