Thanks for the advice - I will definitely try it out on a small section before hacking everything (also verifying with the seller before buying would be a good idea).
With respect to a star (lets say 4 piont that never meets in the middle):
The fun bit is that you can run some strip out from the center - cut the strip, solder wires on the cut end of that section - solder those wires on to the bit you cut off and you have an acute corner, so the strip can return to the middle. Rince and repeat.
That said: you may want to split up the star for power a string lenght reasons. But thats a whole new post.
Yep I'm actually looking to build something along the lines of the pixel star in this video (starting at 1:37). But thanks for the design suggestion - it's going to take some strategy to build this thing effectively.
LightsByGreg wrote:Yep I'm actually looking to build something along the lines of the pixel star in this video (starting at 1:37). But thanks for the design suggestion - it's going to take some strategy to build this thing effectively.
Cool and I agree that stars are one of the best use of pixels.
The example you have chosen to copy is proberbly one of the best ever done. It appeared in a show last year that was a profesional comission - the show only lasted the duration of the video you see.
Not to quash your hopes - (I can't find the post) but I beleve the star was 28 feet across and used about 3000 pixels.
That said - i'm intending to build a star this year - 500 to 700 pixels based on the same video - but I may cheat and go video. TBA.
Awesome! I'm totally aware of the scale of things in that show - I think I read somewhere that the video trees in the front were each 40 feet high. Right now the plan here is to make something of a 5-6 foot diameter with around 500 pixels. I might use a more dense strip with 64 pixels/meter for the star and then the 30 pixels/meter strip for the tail. Tentatively the star body would be mounted in front of the top left window of my house, video here.
