Forgive me if this has been covered, but after days of searching, I haven't found the answers I'm looking for.
I want to get into pixels for next year and think I'm going to start with an E682.
From what I've read, I'm assuming I can control ~1000 individual pixels with a single E682 (please correct me if this wrong). If I build a feature with lets say 2k or 3k pixels and want individual control over all of them, do I just use more E682s and use the lighting software to combine the multiple controllers into a single system?
If I'm wrong about the max pixels controlled by a single E682, what is the actual number?
How difficult is it to program a sequence on a megatree that is so big it requires multiple controllers?
Technically you can control 6 dmx universes with the e682. However there are a few caveats. First of all only 510 channels per universe are supported. (Leaving 2 unused, because one pixel cannot span across two universes) so that's 170pixels per universe for a total of 1020 pixels.
Then your strings have to be divided appropriately across the 4 outputs in each of the 4 clusters. If all of your strings are the same and you loaded all 16 outputs with strings of 63 pixels in length, you'd end up having 1008 total. (With 12 wasted because 16 doesn't divide evenly into 1020). You could have 12 strings of 64 and 4 of 63 and use all available 1020. This is all related to addressing and configuration, these are theoretical limits and situations.
Keep in mind strings over 50 can have voltage drop problems. So there's other electrical considerations you'll need to work out.
If you need more pixels, just add another controller and keep going. The average cheap consumer home network can handle somewhere around 20 universes of network traffic. (Thats 3.3 fully loaded e682s) This network limit isn't a firm number because there's a lot of other variables that come into play. When you get somewhere beyond that limit, you need to start doing some network engineering and perhaps use commercial grade network equipment to make it all work well.
Hope that's a start for you. Welcome to the hobby!
--Jon Chuchla--
Sent from my iPhone using Tapatalk
Thanks a lot. Thats answers a lot of questions and some I hadn't even thought of.
What about programming sequences for a single feature (megatree) that uses numerous controllers? Is this simplified through the software (vixen for example) or does this create a complicated issue?
No matter how you do it, sequencing a lot of pixels takes a lot of work. I'm not the expert on that part. This year I have mine all running just preprogrammed chases being driven from a custom board (no pc involved). I wanted to just get thru the hardware learning curve this year. It varies by software, but the bottom line is you just use one e1.31 plugin definition in the software and define all the universes you're using within that definition.
Thanks. Hopefully I'll order my E682 soon and a string or two of lights and start playing around.
