Controller channel ...
 
Notifications
Clear all

Controller channel count

29 Posts
6 Users
3 Reactions
3,470 Views
Posts: 429
(@mikekrebs)
Reputable Member
Joined: 12 years ago

https://kulplights.com/product/k8-pi/
This k8 has 8 ports on board and 3 differential ports. The diff ports can run up to 300 feet away. All in for the rpi/controller board/3 receivers is about $250. Add a TA-200 enclosure. Add 3 long ethernet cables to get to where your props are and of course power supplies and props as well as USB network card to load up the sequences and then multi-sync with other fpp based controllers.

You could go to one of the controllers that just does differential output as well. Then get a bunch of 4 or 8 port receiver cards.

Or Kulp also offers this nice compact design for a 4 port controller:
https://kulplights.com/product/k4-pb/


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

What would your ideal controller look like, how much of your current investment are you're trying to re-use, and what sort of budget are you thinking of? I'm having difficulty envisioning what you're looking for, in particular the physical layout and the cabling involved.


Reply
Aurbo99
Posts: 2804
Topic starter
(@aurbo99)
Famed Member
Joined: 19 years ago

I will create a layout diagram showing my current setup once I figure out how to upload images


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

Incidentally, I've found a file named 'renard-px1-dmx.asm' (which purports to receive DMX packets and send out ws2811 pixel streams) on one of my somewhat disorganized USB flash drives, although I don't know how much it's been tested.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

It appears that I may have uploaded some version of that code in 2014, there are a couple of threads regarding that in the 'PIC Code' sub-forum back then.


Reply
Page 2 / 6
Share: