Controller channel ...
 
Notifications
Clear all

Controller channel count

29 Posts
6 Users
3 Reactions
3,471 Views
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

The threads that I mentioned in the previous post are about DMX code for AC controllers, not for the PX1. I'll upload the px1-dmx code to the green forum later today, since the file library on this site is non-functional. If I can find a way to generate DMX frames from Vixen2 I'll try to do some testing first.


Reply
Aurbo99
Posts: 2804
Topic starter
(@aurbo99)
Famed Member
Joined: 19 years ago

Thanks Phil


Reply
ChiefWarrant
Posts: 570
(@chiefwarrant)
Honorable Member
Joined: 19 years ago
P. Short wrote:
Incidentally, I've found a file named 'renard-px1-dmx.asm' (which purports to receive DMX packets and send out ws2811 pixel streams) on one of my somewhat disorganized USB flash drives, although I don't know how much it's been tested.

I wasn't sure Phil, but I also tried checking the Wiki...but saw it was still being worked on.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

That was from 10 years ago, and much has happened between then and now.

I've found the file, but the difficulty that I'm encountering is that the file is written for a version of the Microchip assembler that I don't have a copy of, and I don't want to download something that old. I had to modify the .asm file for the different assembler syntax that MPLABX used, and that process is not yet done (thanks, Microchip, for making things more difficult). I plan to upload both versions, but I want to test things first. I will test using the MPLABX version of the assembly code, as that's pretty much a direct translation, and success there will give me confidence in the code for the older assembler.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

The DMX bridge that I'm planning on using is an RPM 'USB to DMX Adaptor V1.02' from 2009, hopefully it has survived sitting in a box all of these years. Does anybody know if that is a good version?


Reply
Page 3 / 6
Share: