Cheapest controller...
 
Notifications
Clear all

Cheapest controller for mega tree?

10 Posts
8 Users
0 Reactions
4,948 Views
Posts: 2
Topic starter
(@nesto)
New Member
Joined: 7 years ago
[#51831]

Ok I realized I went from baby step to marathon. Last year first time messing with any pixels. Made a holidaycoro 100 pixel snowflake controlled with a Arduino mega with xlights. Worked great even synced it with music. This year I decide to do a mega tree 180 16 strands 50 per. Stupidly I thought I could use the Arduino to control the tree the same as the snowflake from last year. I found out fast I was mistaken.

So I’m looking for a controller just for the tree. I’ve already built it I would love to get this working.

Thanks for any help and guidance.


9 Replies
Posts: 344
 TSL
(@tsl)
Reputable Member
Joined: 10 years ago

You can’t go wrong with the Falcon F16

Sent from my iPhone using Tapatalk


Reply
RGB_Mixer
Posts: 270
(@rgb-mixer)
Reputable Member
Joined: 12 years ago

Consider your choices.

Falcon makes some good devices. SanDevices is a very good choice.

My first controller was from SanDevices. An E6804 - It was my first run with pixels, GE Color Effects, and that controller met my needs at that time. It runs my mega tree. 1024 pixels.

If you can shell out the extra coin, I would recommend a 16 channel controller because it sounds like you are going to get into this "ADDICTION" we call FUN 🙂


Reply
Posts: 116
(@jcasterline)
Estimable Member
Joined: 15 years ago

There are some options out there that are based off of the BeagleBone platform. A few of them are open source. For a speedy setup, I'd recommend the falcon F16, as it is easily expanded. You could also feed a tree with a few Pixel-sticks.
A few years back, I had a 10 string pixel tree. I used 2 Arduino Nano's, and some rs-485 adapters.

Sent from my XT1254 using Tapatalk


Reply
Barnabybear
Posts: 1583
(@barnabybear)
Noble Member
Joined: 15 years ago

Hi, if I was in your position at this time of year I would go for a Raspberry Pi Zero W and a 3.3V to 5V level shifter. Running FPP and two strings of 400 pixels each – 8 of your 50 strings zigzagged. For more information Google ‘Falcon Pi Player’.


Reply
Page 1 / 2
Share: