Notifications
Clear all
Dec 20, 2016 7:05 pm
markrvp wrote:
If all you want to do is verify the lights work, then something like this would work nicely: http://www.holidaycoro.com/DMX-to-SPI-Smart-Pixel-Decoder-Controller-p/614.htm You can also make that work as a controller, but you need something to output DMX512 from your computer.
Actually the EasyPix above has 22 built in test sequences that can be run without any signal which makes it perfect for RGB testing and full on white testing. Here are those modes:
It also has screw terminals for easy on and off testing.
The AlphaPix 4 also has the same built-in test modes if you want something that can take an E1.31 input also (test mode can also be used via the LCD):
http://www.holidaycoro.com/AlphaPix-4-V3-RGB-Pixel-Controller-p/722-v3.htm
That is $104
Dec 21, 2016 5:41 pm
Let me second that EasyPix comment from Dave. The older version, i wouldn't have recommended but the newer versions have replaceable fuses and driver chips which, I'm sorry to say, has come in very handy.
Greg
Page 5 / 5
Prev
