cheap controller fo...
 
Notifications
Clear all

cheap controller for bench testing lights

22 Posts
15 Users
0 Reactions
6,017 Views
kwoodard
Posts: 281
(@kwoodard)
Reputable Member
Joined: 13 years ago

For bench testing of pixels, I typically use a ESPixelStick. Cheap and easy to use. A little difficult to get your hands on except through the group buys though.


Reply
Posts: 36
(@craigm)
Trusted Member
Joined: 11 years ago

I love the Teensy from PJRC.COM with the OctoWS2811. It is small and can be powered from a 5Volt source. Some simple code will allow it to test up to 4000 lights. All in for less than $30.00 and an old cat 5 cable.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

I use a F16V2 for bench testing. I used to use a pixlite4, but it found its way into my show this year, so an f16V2 got the spot on the bench for now.


Reply
Posts: 1049
(@phrog30)
Noble Member
Joined: 12 years ago
Vipersinu2 wrote:is there a cheap controller that I can hook up to computer for bench testing lights from xlights.

I have a pixlite 4 that I'm not using if interested.

James

Sent from my Pixel using Tapatalk


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
Vipersinu2 wrote:I looked on line. Does this need to be built? I can find is a board.

Yes, you assemble the Renzilla. We have a basic build kit available for it, but there are so many options the only kit that makes sense is to provide a basic kit and then additional kits for the various adapters.


Reply
Page 2 / 5
Share: