So will this controller light up lights when power is provided? Reason I ask is how do I control time lights turn on and off when its just for landscape?
I built 8 dumb RGB floods from HolidayCoro - cheap and effective
Sent from my iPhone using Tapatalk
ronaldpa2 wrote:So will this controller light up lights when power is provided? Reason I ask is how do I control time lights turn on and off when its just for landscape?
Yes but I don't know if it retains settings when it turns off but my guess is that it does so you could just buy a landscaping photo cell plug or timer or combo and plug the power supply into it for your off season look.
bobbyb wrote:I built 8 dumb RGB floods from HolidayCoro - cheap and effective
He already has the floods he was looking for a cheap but dependable way to control them in a show and off season as landscape lighting.
Yeah I was just going to hook up to my micasa Zwave system. Cool . I guess I will find out. Already ordered it.
If you are looking for a good controller look at the 8 universe controller over at Ron's Holiday Lights. He has a website but most of his business is handled at DIYChristmas.org. I have 2 8s plus his new 16 universe controllers.
Steve aka llightaholic
How about an NRF transceiver connected to the Pi for the transmitter, and a Komby RF1_12v for the receiver.
Just another thought.
Howdy... new here to the forum, but tossing in my 2 cents.
I've been doing some "custom control" on various WS2811-based strips for almost 2 years now. My latest projects are using the Cypress "System on Chip" PSoC controllers. The nice part is that a 5LP (low power) mini-board is about $10 a Digikey, so if you want to do a lot of it, they're pretty cheap to use. http://www.digikey.com/product-detail/en/CY8CKIT-059/428-3390-ND/5184557
Of course the downside is What You See Is What You Get. I've soldered on some headers, wire-wrapped to a solder breadboard, and connected it all to a USB power stick, and run it for demo purposes. A demo of the stand-alone box should be available here later today:
.
The E6804 in kit form is $69. I have 2 of them and also use one output to run Renards.
Sent from my Nexus 7 using Tapatalk
So I got the easypix from holiday coro but i am having issues getting it to drive robs leds floods. Anyone use the easypix successfully with robs setup?
ronaldpa2 wrote:So I got the easypix from holiday coro but i am having issues getting it to drive robs leds floods. Anyone use the easypix successfully with robs setup?
I've not tried it myself I have everything to put it together to test other then time 🙂 Can you describe how you have it all wired up pictures would be good too. I'll try to get one assembled this weekend and give it a try to see what luck I have.
