help with alphapix ...
 
Notifications
Clear all

help with alphapix 4 setup

18 Posts
9 Users
0 Reactions
6,983 Views
Posts: 52
Topic starter
(@bassnbuck)
Trusted Member
Joined: 13 years ago
[#37842]

i was wondering if anyone could give me help trying to figure out why i cant get my alphapix 4 working correct.
1st output 600 pixel 300 next 600 and 450 at the end(26 strips 75 pixels high). i get everything setup in xlights and when i start to output to it it starts to do the effect and starts random light flashing. holiday coro thinks it is a firewall or something like that but i am using the same computer i ran my show on last year. if i then hit stop in xlights the effect stops and the random flashing keeps on. I have been wasting a lot of time with this and hoped someone had ideas i can try. If not my next move is to pay $40 to see if holiday coro can fix it. any help would be appreciated.


17 Replies
stallionent
Posts: 1460
(@stallionent)
Noble Member
Joined: 13 years ago

The outputs are numbered DMX, 4, 3, 2, 1 on the board, you may have them reversed?

$40 to fix? I just sent one Alphapix 4 back to Holidaycoro, because it was locked up on " upgrade" They better not charge me.


Reply
Posts: 52
Topic starter
(@bassnbuck)
Trusted Member
Joined: 13 years ago

The 40 dollars was for the end to end setup assurance for possible network issues.
I will check on the output but they would work with the effects but in addition there was random flashing

Sent from my SM-N900V using Tapatalk


Reply
dpitts
Posts: 1020
(@dpitts)
Noble Member
Joined: 16 years ago

What pixels are you driving.

Sent from my LGLS990 using Tapatalk


Reply
Posts: 52
Topic starter
(@bassnbuck)
Trusted Member
Joined: 13 years ago

I am trying to us the ink 1003. Which I have setup as 2811

Sent from my SM-N900V using Tapatalk


Reply
Page 1 / 4
Share: