I have the AlphaPix4 and its working fine. Seeing that you said you have a second controller thats doing the same thing makes me also think that the problem is at the computer level. Can you post screenshots of your xlights configuration as well as the controller configuration?
Do all the test patterns on the controller display correctly? When you stop xlights does the yellow light stop rapidly flashing on the controller Ethernet jack? If you have the upgraded firmware led 2 (green) should stop flashing without E1.31 data as well. If those lights are flashing it means E1.31 data is still being sent to the controller.
stallionent wrote:OK to the $40, I guess. I paid $19.99 for end to end but was on the pre-sale.But who's to say if its a faulty Alphapix 4 ?
If faulty it should be covered under the warranty, no $40.
The End to End support does not affect the warranty - that is provided with every controller. The optional support is ONLY for PC side setup that has nothing to do with the controller - this includes items like network configuration on the PC, firewall mitigation, sequencing application configuration. We let customers decide if they have the IT skills neccessary and if so, they should not be asked to pay for support, which costs us money, if they don't need it.
We are pretty adept at torubleshooting controllers after nearly two full years, hands on with hundreds and hundreds of customers and we can typically tell if an issue is user induced (shorts, mis-wiring, damage, etc) and where there is a hardware issue.
For some customers, we do ask them to send their controller to us for configuration or fixes when the neccessary skills are not present or we are unable to obtain sufficiently detailed information needed to resolve the problem. In some cases we do charge for this as it is not a hardware issue and others we do not - we consider each case individually.
Again, the $19.99, $39.99 or $40 amounts have nothing to do with warranty or base level controller support as those are included with every controller.
David
HolidayCoro.com
BASSNBUCK wrote:I have a second alpha pix 4 and that did the same thing. I do have a p12s that I could but it can only do 340 per output so I would have to rewire it to testSent from my SM-N900V using Tapatalk
I concur with the prior post above - if it is happening on both controllers that leads me to believe there is a PC issue and setting up a compeltely different controller would likely be an excellent A/B test for comparison.
I had issues with my alpha 4 (2 of them) but my alpha 16 worked. as soon I as turned off my avg internet security I was able to use them. I am not sure why only the alpha 4's do that but it work for me. There is no cost to try it before you buy anything else.
BASSNBUCK wrote:i was wondering if anyone could give me help trying to figure out why i cant get my alphapix 4 working correct.
1st output 600 pixel 300 next 600 and 450 at the end(26 strips 75 pixels high). i get everything setup in xlights and when i start to output to it it starts to do the effect and starts random light flashing. holiday coro thinks it is a firewall or something like that but i am using the same computer i ran my show on last year. if i then hit stop in xlights the effect stops and the random flashing keeps on. I have been wasting a lot of time with this and hoped someone had ideas i can try. If not my next move is to pay $40 to see if holiday coro can fix it. any help would be appreciated.
MikeKrebs wrote:Random flashing? You mean the lights randomly flash or they flash at random times. I finally got 16 strands of 2811 bullet nodes attached to a alpha pix 16. When in the latest x lights running 50 twinkle with red background and white foreground, a couple of strands will flash green. At this point it is specific channels/strands at random (but frequent enough) times. Wonder if your issue is similar? I don't know the answer though. Today will be trouble shooting day.
There are some 2811 bullet pixels that do not like to be driven with higher than 12V. Please make sure your voltage to pixels is about 11.5V to 12V at max if you have some of these.
Ran into flicker today. I realized the LOR controll panel was running and the LOR listener was open. Conflicting data messed with my 250 pixel test sequence. Good luck!
Sent from my SCH-S960L using Tapatalk
yes i did the upgrade it says it is 1.03.
