was gonna ask the same about IP addresses - if lights are coming on for 3 seconds then going out, that seems like normal operation for Test 0 pattern. I don't have a Mac, but can you go to some sort of command prompt and ping 192.168.1.206? I use a spare laptop sometimes for testing, but I always need to remember to go set the IP address, otherwise I'm typically on a wifi on different subnet
also, Jim St.John at Sandevices has always been responsive - if there is something wrong, he can probably help
Jim at SanDevices got back to me and said he had many reports of the latest version of safari giving people trouble. And he told me to try Chrome. AND IT WORKED! So if anyone else is having this issue, try Chrome instead of safari. Thanks for all the advice!
That's weird - thanks for sharing the result...I'm sure will save others some grief
Sent from my iPad using Tapatalk
unfortunately I'm having sort of the same problem.
1 i can't access the e682
2 i have everything plugged up and half of my pixel nodes are on, red and the next 18 pixels are green red blue white. and more brighter than the first 50 that are red.
can some one here help. first to access the e682 thanks guys
