Cant log into E682!...
 
Notifications
Clear all

Cant log into E682!!

28 Posts
11 Users
0 Reactions
6,762 Views
Posts: 50
Topic starter
(@blarson)
Trusted Member
Joined: 11 years ago
Cmschleich wrote:The following is not likely what you're interested in hearing, but if you get to the point of no return, I have one I'm looking to sell. I'm year 1 so it's only been used lightly.

Thank you for the offer. I actually have a brand new Alphapix 16 V3 sitting in the box. Was going to add lights with it this year but ran out of time.

rstehle wrote:You may have some corrupted firmware. If you have a 'Prop Plug' you can load new firmware from the Sandevices site.

I think this may be the case. I had to google what a 'prop plug' and I think I might understand what it does. I don't have one but it looks like they are only $14. Then I'd have to learn how to use it. Lol is this the only way to get new firmware onto the e682? I wish there was a master reset of some kind.


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago
BLarson wrote:Thank you for the offer. I actually have a brand new Alphapix 16 V3 sitting in the box. Was going to add lights with it this year but ran out of time.

I think this may be the case. I had to google what a 'prop plug' and I think I might understand what it does. I don't have one but it looks like they are only $14. Then I'd have to learn how to use it. Lol is this the only way to get new firmware onto the e682? I wish there was a master reset of some kind.

Unfortunately using the Prop Plug is the only way I am aware of if you are not able to reach the controllers web page.


Reply
Posts: 259
(@cmschleich)
Reputable Member
Joined: 11 years ago
BLarson wrote:Thank you for the offer. I actually have a brand new Alphapix 16 V3 sitting in the box. Was going to add lights with it this year but ran out of time.

I think this may be the case. I had to google what a 'prop plug' and I think I might understand what it does. I don't have one but it looks like they are only $14. Then I'd have to learn how to use it. Lol is this the only way to get new firmware onto the e682? I wish there was a master reset of some kind.

I had to buy one for mine. This is year 1 and I happen to get an E682 that for some reason wouldn't work with Ethernet firmware update. E682 support told me something about one of the chips being older or something (I bought from Seasonal Entertainment which went bust or something shortly after I got my controller in January). Thankfully the prop plug turned out to be really easy to use, I was dreading another R&D effort but it was mostly plug and play with my PC. I don't recall the details if I had to add a driver or not, I just remember being very happy how quick it was in the end.


Reply
Posts: 825
 DanJ
(@danj)
Prominent Member
Joined: 13 years ago

Agree with the comments about the prop plug. I am not very proficient at using devices like this and I found it extremely simple (THANKFULLY!). One thing you can try (but you probably already have....) is to power the controller down then back up. I have found that to help with my inability to login. I am running FW 5.01x (18 I think?)..


Reply
Posts: 1159
(@deonb)
Noble Member
Joined: 13 years ago

Bit of a obvious thing here... but is your MAC/PC actually on the same subnet as your E682?

So if the E682 IP address is:
192.168.1.206

Is your desktop IP address:
192.168.1.x

?


Reply
Page 2 / 6
Share: