Another pixel contr...
 
Notifications
Clear all

Another pixel controller

292 Posts
18 Users
0 Reactions
81.5 K Views
Posts: 313
Topic starter
(@ee351)
Reputable Member
Joined: 13 years ago
Bob Moody wrote:Okay ... I have the SD-6804 and the EEGECEv3 boards configured and running in Vixen 3.1u2 (64bit)

I ran chases down both .. and while the SanDevice seems to be MAYBE... a half a pixel ahead, I cant say that it really is because I'm still stumbling around with how to put things on the grid.. I know they both started at 00.00 and ended at 3.2000
However when I dropped a nutcracker bar effect on the grid it looks pretty darn right on the money ...

By the way .. it wasnt until I dropped the 36 pixel chase to about 1.5 seconds that I started noticing drops and yes, they occured in both strings ..
From about 2 seconds on up .. rock solid (except it for as I mentioned.. the SD seemed about 1/2 a pixel ahead... if you werent staring at it .. you may not even see it..

Maybe Jon could send me a test sequence in Vixen ??? (since he IS THE VIXEN GURU...)

But first impression.. the EEGECEv3 controller is right there with my 6804 as far as keeping up.

Bob

Were you also using the enc28j60 ws2812 driver with this test?


Reply
Posts: 217
(@bob-moody)
Reputable Member
Joined: 18 years ago

So far all I had set up was the 6804 and the EE_GECEv3.
I can fire up the 2811 and add it to the mix ..

However, with the pin Jon stuck in the balloon .. I'm not sure what the point is .. other than yes the boards work with Vixen ..
(and it does .. quite well...) But !!!!! thats not to say I'm not game .. I'll test or try anything (Untill Sandra tells me enough is enough ... )

Bob


Reply
Posts: 217
(@bob-moody)
Reputable Member
Joined: 18 years ago

Just to say it works ....
the 2811/12 controller works just fine with Vixen.

Bob


Reply
Posts: 217
(@bob-moody)
Reputable Member
Joined: 18 years ago

Havent heard anything more ... are we done?


Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago

So if the ws2812 with the enc28j60 works better than the EE_GECEV3 with the same ethernet controller, then that implies the cogs spitting out the GECE code is not working well. I am still setting up my new workshop so have been delayed tring it out. But I will do so soon.

Sent from my GT-I9505 using Tapatalk


Reply
Posts: 217
(@bob-moody)
Reputable Member
Joined: 18 years ago

Matt,

The GECE and WS2811/12 controller both worked equally well with Vixen.
However make sure you look at Jon's post regarding how Vixen works compared to xLights or LOR.

My delima now is two fold.
1. I am heavily vested in LOR for sequencing. I have about 20 sequences (3 or 4 are bought.. the rest are mine). That would be one HECK of a conversion...
2. I'm behind the 8-ball with Vixen in that the laptop I use to run my shows wont run Vixen ... (Dell Inspiron 1300). Its running XP and has only 2GB of RAM.

Bob


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

Note that my comments were relevant to the vixen 3 engine. Vixen 2 is much like lor and xlights.
That being said. I typically advocate a hybrid approach. Create your new stuff in a newer sequencer. And keep using your old stuff as well. You'll just need a scheduler that can handle it all. Xlights is a good choice for that. It will require a one time export or import prior to show time. But it will work with all of your content both old and new.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago

Bob,
Sequenced last year completely in vixen+, and up loaded them to a FPP.

Sent from my GT-I9505 using Tapatalk


Reply
Posts: 313
Topic starter
(@ee351)
Reputable Member
Joined: 13 years ago
Bob Moody wrote:Matt,

The GECE and WS2811/12 controller both worked equally well with Vixen.
However make sure you look at Jon's post regarding how Vixen works compared to xLights or LOR.

My delima now is two fold.
1. I am heavily vested in LOR for sequencing. I have about 20 sequences (3 or 4 are bought.. the rest are mine). That would be one HECK of a conversion...
2. I'm behind the 8-ball with Vixen in that the laptop I use to run my shows wont run Vixen ... (Dell Inspiron 1300). Its running XP and has only 2GB of RAM.

Bob

Did your e6804 work ok with LOR?


Reply
Posts: 217
(@bob-moody)
Reputable Member
Joined: 18 years ago

As a gece controller really no better or worse than the EEv3 controller.


Reply
Page 29 / 30
Share: