AlphaPix options
 
Notifications
Clear all

AlphaPix options

4 Posts
3 Users
0 Reactions
2,198 Views
Posts: 2
Topic starter
(@halfmoonhr)
New Member
Joined: 12 years ago
[#37338]

I've got a question about an option on the AlphaPix controller. There are two options I see that I would like to make clear to me. 1st is Reverse Addressing (This one seems clear when used it makes last pixel in string with starting address of #1 and works backwards.) 2nd is Reversed this option is very odd to me would that not be the same as reverse addressing? Or I'm I missing something?

I hope this a Duh moment. But could anyone help clear that up for me.


3 Replies
StickyWicket
Posts: 548
(@stickywicket)
Honorable Member
Joined: 14 years ago

I believe reversed is putting the string in reverse order pixel #1 at end. Reverse Addressing is like zig-zag on other controllers. You type a number in that box (like 25) and every 25 pixels the order will reverse. This is primarily used for mega trees and matrix objects.


Reply
Posts: 145
(@pstube731)
Estimable Member
Joined: 13 years ago
StickyWicket wrote:I believe reversed is putting the string in reverse order pixel #1 at end. Reverse Addressing is like zig-zag on other controllers. You type a number in that box (like 25) and every 25 pixels the order will reverse. This is primarily used for mega trees and matrix objects.

That's exactly right. I've tested it myself

Paul


Reply
Posts: 2
Topic starter
(@halfmoonhr)
New Member
Joined: 12 years ago

Thanks guys for clearing that up for me!! Big help.


Reply
Share: