Standalone + Comput...
 
Notifications
Clear all

Standalone + Computer controlled

18 Posts
10 Users
0 Reactions
10.1 K Views
griffixdc
Posts: 2512
(@griffixdc)
Famed Member
Joined: 16 years ago

with that being said i truly apologize, for spamming this thread with a lot of useless comments in defense of my self knowledge.
As for my questions with quick answers i do understand what i am doing, just have 0 experience when it comes to computerized Christmas lighting....i am trying to relate it to what i do know. I have used and installed lighting management programs similar idea but not as flexible as the units here. (beside never made one from scratch. I try to ask kinda dumb questions to see if i missed any steps or processes, then figuring that out i ask questions that someone with a little more knowledge would know, then with the answers to that i am able to develop the concept in my mind or i will ask very specific detail. It works for me 🙂 maybe annoying to others. But you might be right, but i dont think learning and not know is humiliating, just makes me curious for more.
Whats great about this forum as where someone may know nothing can help that same person with something else. Plus we do have a lot of experienced or knowledgeable people of the products being made or used. I was soo lucky to talk to James first and he guided me on the right track with the ren24ss when i first stated i wanted to make a unit like the LOR units


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I'll echo many of kychristmas' comments and add a couple more to take this thread quite a bit further off original topic...

There's such a thing as "book-learned knowledge." It's the stuff they base tests upon and give you a certificate. It's important stuff, to be sure, and it most certainly takes a lot of work and not a trivial amount of money to go through that education. One who successfully completes such training should be commended because it's quite an achievement.

There's also another thing called "experience knowledge." This is the stuff they can't put in textbooks or in classrooms or in tests. And while college and/or vo-tech education costs money and takes time, it's only a few years. "Experience knowledge" is accumulated across an entire lifetime and you can't buy it, even if you had all the money in the world. You have to earn it.

The collective experience knowledge available here at DIYC probably measures in the many thousands of years. As you get along in years yourself, you'll discover that much, or maybe even most, of the book-learning will be replaced by experience which, you'll likely find, will also be a lot more practical. But you'll have to earn it, and that often means talking less and listening more.


Reply
Posts: 987
(@wirewrap)
Noble Member
Joined: 18 years ago

{dead horse mode}

I'll just drop a quick note in here. In the top-right corner of each post, you'll see the poster's join date and the number of posts submitted. As those dates get older and older, and the number of posts submitted goes up, you can USUALLY expect that the poster has some degree of reliability.

(Since foolish or erroneous posts tend to attract rather disparaging comments :rolleyes: :rolleyes:, those posters usually tend to leave fewer unthinking posts. :roll:)

So, when you see a count over 1000, there's a pretty good chance that there is some useful information in that post. Just my $.02 worth.

{/dead horse mode}

🙂


Reply
Posts: 393
Topic starter
(@soakes94)
Honorable Member
Joined: 18 years ago

Wow there we alot of responses in a short amount of time, my plan is to take something like the ren24LV from memory is the DC one, and run probably 5 RGB lights so 15 channels but with room to expand.

I want to be able to run custom sequences made in Vixen or use my iPod touch, LSP and touch osc and control each light using my ipod and show of to my friends.

However I don't have money to run a separate computer to run the lights and I don't want to slow a machine down running a sequence all the time so I want to be able to run a standalone mode which would just be something like lights fading in and out, or flashing. I would really like to have a small control box allowing me to change what standalone mode it runs, so maybe have a slow fade mode, quick fade mode, strobe, police that kind of thing.

Something I thought I could do but don't know how to do it or if it is possible with pics would be to sub routine the code that works with the commands from the computer and create a sub routine for stand alone mode and have a timer that checks for a signal coming from the computer and "If signal = false then standalone_mode = true else computer_mode" I don't know if anyone can help. I have no idea what to do with pics, or what software I should be using.

Thanks for everything 🙂


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

One possibility for a standalone controller would be an arduino or one of its clones. They are fairly small, and not too difficult to program (or so I've read). I don't know if anyone on this board has programmed one to control a Renard (as opposed to controlling lights directly), but it is something to look into.


Reply
Page 3 / 4
Share: