PicKit 2 Starter Ki...
 
Notifications
Clear all

PicKit 2 Starter Kit

7 Posts
4 Users
0 Reactions
5,919 Views
n8huntsman
Posts: 562
Topic starter
(@n8huntsman)
Honorable Member
Joined: 16 years ago
[#13843]

Does the DV164120 direct from microchip include the ICSP 18/20A pin Adapter or is that something extra that they add to the ebay kit?


6 Replies
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 19 years ago

It is the Starter Kit, and it comes with a 20 pin socket.


Reply
n8huntsman
Posts: 562
Topic starter
(@n8huntsman)
Honorable Member
Joined: 16 years ago

The one here on ebay shows an extra little cable that I do not see on the microchipdirect website. What is that cable for and is it included in the stater kit and maybe it just isnt shown in the picture?


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 19 years ago

You are looking at two different kits. They both do the same thing. I personally would get the one from the Ebay link, for the ZIF socket. Much more gentle on the IC pins.


Reply
Materdaddy
Posts: 2368
(@materdaddy)
Famed Member
Joined: 16 years ago

To answer n8huntsman's question about the cable a little more directly, that cable is to mate the PICkit2 to the ICSP adapter board. If you notice, the one sold by microchip has right-angle header pins so you can slide the PICkit onto the break-out board. The one on eBay will attach at a 90 degree angle, or you use the included ribbon cable to mate the PICkit and break-out board.

I have the kit Wayne J recommends from eBay and it works great.


Reply
Page 1 / 2
Share: