Programming PIC wit...
 
Notifications
Clear all

Programming PIC with JDM

4 Posts
4 Users
0 Reactions
4,693 Views
Posts: 3
Topic starter
(@somedudeintn)
Active Member
Joined: 17 years ago
[#10299]

Hey,

Does anyone have some tips on programming the PIC 16F688 with a JDM programmer. I was using WinPic and the 16F688 is not listed as an option. Any suggestions on software, or how to use the WinPic with the 16F688?


3 Replies
Posts: 2215
(@ctmal)
Famed Member
Joined: 19 years ago

Here's the program I had success with...
http://members.aon.at/electronics/pic/picpgm/

Let me know if you continue to have problems.


Reply
IdunBenhad
Posts: 1603
(@idunbenhad)
Noble Member
Joined: 18 years ago

Hi:
I just finished programming 10 16F688 PICS a few minutes ago, and no problems.

I am using WinPic800, version 3.64. The 16F688 is listed in that software.

You can find it here: I'm using Windows XP.

http://www.winpic800.com/index.php?option=com_content&task=blogcategory&id=18&Itemid=64&lang=en

Just went over and checked out the other listed program PICPgm. It works very good, too.

Now you have choice. (Me too).

Good Luck

Idun


Reply
Posts: 218
(@ailgup)
Reputable Member
Joined: 17 years ago

yeah to somedudeintn this 16f866 is an option in winpic800 at least i could find it but when i try to delete the chip it dosen't work, i have it saying the device is found and the red led is on when the chip is in but i can read but not write or delete. Any advice ????


Reply
Share: