Xlights and SS24
 
Notifications
Clear all

Xlights and SS24

5 Posts
3 Users
0 Reactions
1,640 Views
Posts: 28
Topic starter
(@carterm)
Eminent Member
Joined: 12 years ago
[#43787]

So I have about 2k pixels going on my house, but there are a number of 'traditional' elements I want on during the times my show isn't running. So I have an SS24, and I know how to get it integrated with the F16v2.

The thing I'm not sure about is how to model that in Xlights? Do I just represent each of the 24 channels as single pixels in my Xlights model and turn them off when I want? Or is there a better way?

Cheers!
-Carter


4 Replies
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

You should set up each channel on the SS24 as a 'single color' prop and drop white on a channel when you want it on. If you set them up as Pixels, XL will assign each one 3 channels.


Reply
Posts: 28
Topic starter
(@carterm)
Eminent Member
Joined: 12 years ago

Okay. Maybe I just need to spend a little more time looking for that.... I created a single color item, but it shows as a single pixel on the layout which didn't seem right. So I'm on the right path...

Thanks!

Sent from my iPhone using Tapatalk


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

Yep! Now, you can tell xlights how many LED's are on that prop and it will get bigger. You can also increase the size of each led if you want. Play around with the three grey boxes at the bottom of the area of the layout for each prop. 'String Properties, Appearance, Location"


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

You can also create a Custom Model where you can enter the same channel number "1" into a bunch of cells and create an A/C element that has size. I did this to represent an A/C JOY sign.


Reply
Share: