Expo 2x2 P10 Matrix...
 
Notifications
Clear all

Expo 2x2 P10 Matrix Sequence....

72 Posts
12 Users
0 Reactions
21.3 K Views
Posts: 49
(@ametsman)
Trusted Member
Joined: 13 years ago

I saw these panels at Christmas Expo and took the xLights basic class so I am completely a noob at this so correct if I am wrong. I got the .txt removed from the files and have xlights installed. In order to see the sequence I have to create a matrix, correct? In creating this matrix since it is 2 panels high and 2 panels wide it would be 64X32, correct? If I then open this sequence I should be able to view it in xLights, correct? What does the American Flag sequence look like? Basically what I am trying to create is just some some teaxt that says" Merry Christmas From The Kleins" for this year.


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

No you shouldn't need to create a matrix. Mark already created the matrix and it's in the xlights_rgbeffects.xml file. You need to remove the .txt extension from all those file, put them in a new folder we will call a Show folder, then run xlights and change the Show folder to point to this folder. The you should be able to open that sequence file and see what Mark created.


Reply
Posts: 49
(@ametsman)
Trusted Member
Joined: 13 years ago

Ah, now I got it, thanks. I want to mount this inside in one of my windows. How could I power it without the battery pack?


Reply
Posts: 58
Topic starter
(@mararunr)
Trusted Member
Joined: 13 years ago

A couple of 5v wall plugs...

For the BBB specifically...(this is barrel connector, can also use usb mini B connector type power supply)
https://www.amazon.com/gp/product/B00GUO5WUI/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1
And for the P10panels...(cut off the micro USB connector)
https://www.amazon.com/gp/product/B00NL7WK2U/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1


Reply
Wolfie
Posts: 2225
(@wolfie)
Noble Member
Joined: 11 years ago

One of these will probably take care of the whole rig. One plug. Call it a day.
https://www.adafruit.com/product/1466

If you got some old dead laptops laying around, check the power supplies to see if they are 5v. Some are some are much higher. If you got one that puts out 5v see if its 4a or better and you got yourself a power pack for your display. Also check the wall warts you saved from all the dead usb hubs, routers, switches and WiFi rounters you had. You saved the power packs when you threw the dead devices out...right?


Reply
Posts: 49
(@ametsman)
Trusted Member
Joined: 13 years ago

I have boxes of wall warts ranging from 5v up to 19v!


Reply
Wolfie
Posts: 2225
(@wolfie)
Noble Member
Joined: 11 years ago

Find one 5v at 4 or so amps or a couple at 2a and you are good to go. Pay attention to the polarity (check with a meter to be sure).


Reply
Posts: 58
Topic starter
(@mararunr)
Trusted Member
Joined: 13 years ago

Word of caution if you are going to use wireless dongle - I would suggest two power supplies or at least two separate runs from your supply to the matrix. Why? The wifi has been known to be flaky/drop if it shares the same power line as the panels (even the more expensive d-link wifi dongle). Just speaking from experience. That's why in my video at the beginning of this thread, I use a battery pack with two power ports. For my larger show matrix, I run two separate power lines from the PSU - one to the BBB and one to the panels. Cheers.


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

I had a similar issue but it wasn't the wifi I had hard-wired Ethernet and I could ping the BBB but couldn't bring up a webpage. Reboot would fix the problem. I finally used a wall supply for the BBB instead of powering it from the other supply and that seemed to fix the problem. The strange thing is my other 20 panel matrix was wired the same way and never had a problem. Only difference in that setup was I had 2 power supplies instead of one.


Reply
Wolfie
Posts: 2225
(@wolfie)
Noble Member
Joined: 11 years ago

Have yall put a meter or scope on the Vcc line to the BBB/Pi? I suspect that the voltage may be deviating based on pixel brightness. I have been told and seen somewhere in specs on the P10, that they could potentially draw 3a full on. I am wondering if the wire size yall are using in the USB cables feeding the BBB/Pi are too small or the PSU you are using isn't capable of delivering constant voltage as the panels change brightness.

I would also consider putting a ferrite bead on the power cable going to the BBB/Pi as well to filter some of the spiking (EMF and RF) that may be feeding back from the panels.


Reply
Page 3 / 8
Share: