Here’s a cost saving package, if you are interested.
Estimated $102.00 plus power supply or battery
4 – P10’s @ 11.50 ea…….est shipping at $17 ..$63.00 est frt - - - (P10 Ribbon cables incl)
1 – Pi Zero @ $5 plus $5 Frt………………………...…..10.00 frt incl
1 – Ron’s Raspberry PI, Matrix Adapter Kit….……12.00 frt incl.
1 – EDIMAX WiFi Dongle (Newegg sale)……....……9.00 frt incl
1 - 16GB microSD………………………………………..……….7.00 frt incl
1 - USB Male to USB Female Adapter ……….………..1.00 frt incl
. . . (EDIMAX[USB] to Pi Zero[MicroUSB])
Add in your own fused, terminal boards and wire.
If you don’t like using the Pi Zero, upgrade to a Pi3. Adds about $30 but you can delete the EXIMAX and adapter at a $10 deduct. – Net add $20
I ran the expo demo on this package, and now I have 2 of these running my tune to signs.
Edit: per several requests, adding vendors.
P10's - Diyledexpress.com - http://www.diyledexpress.com/index.php?main_page=product_info&cPath=75&products_id=455
Ron's Pi Matrix adapter - Renard-Plus.com - http://renard-shop.com/home/48-raspberry-pi-matrix-adapter.html
16gb microSD - eBay.com - http://www.ebay.com/itm/SanDisk-16GB-microSD-Ultra-48MB-s-C10-micro-SD-SDHC-16G-SDSQUNB-016G-sliver-/390574203829?hash=item5af00963b5:g:q5kAAOSwENxXmawd
Pi Zero, when stock - https://www.adafruit.com/products/2885
Pi3 - MCM Electronics - http://www.mcmelectronics.com/product/SP-83-16560B
[Not needed with Pi 3]
EDIMAX - Newegg - http://www.newegg.com/Product/Product.aspx?Item=N82E16833315091&cm_re=EDIMAX-_-33-315-091-_-Product
USB Adapter - eBay.com - http://www.ebay.com/itm/Micro-USB-Male-to-USB-Female-OTG-Adapter-Converter-for-Android-Tablet-Cell-E0Xc-/401196857379?hash=item5d69323823:g:ygQAAOSwzaJX6fen
You will still need to build an enclosure- weatherproof it too.
.
.
Here is a complete parts list with prices....$218.32 ($250.31 with battery pack)
Four P10 Panels - $76.06 (delivered)
http://www.aliexpress.com/store/prod...866772137.html
BeagleBone Black (single board computer) - $56.75 (free deliver for Prime users)
Octoscroller (control panels) – $17 plus shipping
http://www.diyledexpress.com/index.p...f5d7458c659b66
Wifi dongle - $18.97
https://www.amazon.com/D-Link-Wirele...ds=d-link+n150
SD Card - $15.99 (store FPP os overlay and sequences on here so that the one usb can be used for wifi)
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Usb cable (power from battery pack to Beaglebone Black) - $4.58
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Usb cable (power from battery pack to P10 Panels) - $5.47
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Boscoyo P10 Connectors/Plates
L1 (top corners with hanger) and L2 (bottom corners) - $4
http://www.boscoyostudio.com/product...products_id=75
X (center of four panels) - $2.50
http://www.boscoyostudio.com/product...products_id=73
T2 (left and right vertical edge center) and T4 (top and bottom horizontal edge center) - $8
http://www.boscoyostudio.com/product...products_id=74
Beaglebone mouting plate – $4
http://www.boscoyostudio.com/product...products_id=78
Miscellaneous wire, soldering, electrical tape, zip ties - $5
Battery Pack I use in the video - $31.99
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
