Expo 2x2 P10 Matrix...
 
Notifications
Clear all

Expo 2x2 P10 Matrix Sequence....

72 Posts
12 Users
0 Reactions
21.3 K Views
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

I ask about text to determine if your panel is rotated
I have sever P10's arrangements, with BBB and/or Pi's. They all setup the same - Pi or BBB. They differ Vixen / xLight with top/left xLight and bottom/left for Vixen

I have 2 - P10 2x2, with Pi Zero's and Matrix Adapters. Both are the same wiring and configuration as yours, except my top is your bottom. So if I were to rotate my bottom to match your top, my xLight seq would print the text upside down.
My arrows point down.

Comments......


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

Yes I'm playing the sequence Mark posted it has Text and photos and everything displays correctly. I can make it work from any start corner as long as xLights and that BBB setup match it displays right side up correctly.


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

OK, I'm good now. Thanks for working this thru with me Gil.


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago
mrGrumpy wrote:OK, I'm good now. Thanks for working this thru with me Gil.

Ok great. I didn't realize you were having trouble I thought we were trying to help akentut.


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

I was, but learned one more thing today.....now I can go watch football


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
ametsman wrote:This is what got it working

Ametsman, I think you need to change your top left panel config to O-8 / P-2, then it looks as you wired


Reply
Posts: 49
(@ametsman)
Trusted Member
Joined: 13 years ago

OK, will try that. Thanks guys for all your help.


Reply
jnealand
Posts: 956
(@jnealand)
Prominent Member
Joined: 19 years ago

Mr. Grumpy I think you are confusing what is normally a hardware controller setup with a software setup. There is no web page for the hardware when using P10 panels so the screen images are those, but the program needs to know where the first channel is set in the sequence. This is two different things.


Reply
Posts: 49
(@ametsman)
Trusted Member
Joined: 13 years ago

I created my own sequence tonight. Uploaded the fseq to the FPP. Everything is working the way it should, WooHoo! Thank you all for your assistance and putting up with my questions. Now I'm ready to rock & roll!


Reply
Posts: 10
(@ealltech)
Active Member
Joined: 10 years ago

Here is a complete parts list with prices....$218.32 ($250.31 with battery pack)

Four P10 Panels - $76.06 (delivered)

Graperain Samsung S5P4418 (Industrial single board computer) - $56.75 (free deliver for Prime users)

Octoscroller (control panels) – $17 plus shipping

Wifi dongle - $18.97

SD Card - $15.99 (store FPP os overlay and sequences on here so that the one usb can be used for wifi)

...


Reply
Page 7 / 8
Share: