I have a basic tree 10ft. tall with 12 strings of green lights. Renard controller with 12 channels dedicated to each string. When I am doing my animation in Vixen 3, I have set up my tree using the alternating effects function. When I playback my preview, it alternates red/white/red/white, etc. Question is: Do I need 24 channels with 24 strings to make 12 strings alternate between 2 colors, or will my green lights just alternate between green/off/green/off for 6 strings lighted at one time? Using standard LED strings. Thanks!
Running conventional lights, eg not smart pixels, you only need 1 channel per string. I don't have Vixen 3 so a vixen expert will need to chime in here. I'm thinking that there may be a configuration for running single bulbs such as blinders, strobes, etc that are not RGB pixels or strings. When not in pixel mode, then you can sequence strings of single color bulbs the same as you would do leaping arches with just strings of miniature lamps. With only 12 channels, it may be easiest to define the tree as a leaping arch with no smart pixels that would be 12 segment instead of the more common 8 segment arch.
With 6 strings of each color, just for ease in sequencing, it may be simpler to define the tree as two single color arches but physically stacked on the same tree. That way you can sequence a red leap and a white leap that can cross each other, or follow each other as desired. If I understand your original post, I think you have 12 strings all green. If so, then defining it as a 12 string leaping arch would be the simplest.
the alternating effect is for 2 colors it will alternate between red and white they are adding the option of changing the colors of the alternating in the new version they are getting ready too release trying too figure out what else you are trying too do I cant really go try my vixen I am testing the new build and it has dif features than the vixen 3.1 has if you want 6 string on and 6 off alternating back and forth you have too use the set level and place it on the 6 you want on and not on the 6 you want off
You can change the colors that alternate, simply change the colors to GREEN and Black.
There is a setting that governs how the colors are alternated if you want 6 on and 6 off it can be done with that setting. I use pixels but use that effect quite a bit and it can do what you want, just play with the settings.
I guess what I'm trying to say is my tree is 12 channels. 12 strings of lights. But in Vixen preview each individual string in the alternating effect alternates white/red/white/red or whatever color I assign them. On the actual tree how would I accomplish that effect?

