I'm re-doing my megatree. Ditching the incandescent super strings and going pixels. I'm using James mounting strips. I was thinking of putting the controller and power supply at the top of the tree to shorten the wiring. One power lead and one cat5 up the pole. At 18 to 20 ft high if I need power injection it's a simple run around the bottom of the tree. Using a heavy duty pole for support (2 inch plumbing pipe) it shouldn't be a problem.
What are your thoughts?
I don't have a MT, but my worry would be how easily I could access it in the cold and dark when there is an issue. Other with MT might say that it doesn't happen frequently enough to worry about it, but these are the type of things that keep me up at night :).
In my opinion it's not a good idea to do that just so you can shorten the wiring. The headache of mounting your controller & PS that high is going to be greater than your wiring lengths.
I'm going to agree in keeping it low for easy access. My big MT was 40' tall and while the controllers are at ground level I installed two 600 watt power supplies to the back side of my star for power injection at end of the 150 ct pixel strings. It worked but I ended up lowering the start to make a repair to one of the power injection lines.
Not fun!
James
In my experience, it's always better to have the controller at ground level. I had a small controller on my MT Star last year and needed to make a better connection on one channel after it was erected. Major PITA. This year, that controller will be at the bottom with the E682. A ladder and flashlight in the cold and dark is not really a good combination, IMHO
