8ft/10ft Megatree?
 
Notifications
Clear all

8ft/10ft Megatree?

28 Posts
6 Users
0 Reactions
15.9 K Views
Kev7274
Posts: 2037
Topic starter
(@kev7274)
Famed Member
Joined: 13 years ago
[#37175]

Trying to decide on doing either a 8/10ft megatree with the 16 50ct strings I got from Todd. It will be a 180 degree tree. What have you guys done with the same amount of strings and how did it look?
I still got to find the calculator to determine the diameter,spacing,etc. Suggestions?


27 Replies
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

50 pixels @ 3" separation make for a 147 inch (12.25 foot) side.
We put up 4 trees made up of these exact settings at 13 feet (at top of strands) and then make for a small separation of lights from the ground at the bottom.
Looks great. tighten up to 2" separation, the 98" side (8.167 feet) makes a really nice 8' tree.

It is worth thinking about - 1) How far from your viewers will the tree be and 2) What are you going to do with it? (Graphics, Color Washes, etc.)


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

I used 6 strings of 50 square nodes too make my 8' 180 degree tree folded the strings in half at top too make up a 12 leg tree made a nice size star too go on top
http://www.altoonalights.com/mega/mega_calc.php


Reply
Kev7274
Posts: 2037
Topic starter
(@kev7274)
Famed Member
Joined: 13 years ago

Wow Taz, that looks good for only 6 strings folded in half. Thought I was going to have to use all 16 to make it look good. I am leaning towards an 8ft Mt. Did you make that star?

Sent from my SCH-I535 using Tapatalk


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

yes I made the star it was left over pvc from cutting my 10' pvc down too 8' for the legs of the tree


Reply
Kev7274
Posts: 2037
Topic starter
(@kev7274)
Famed Member
Joined: 13 years ago

Is that 1/2 or 3/4 pvc for the star?
Did you use 6 or 12 strings in the calculator? I know it's one string,but doubling them up actually makes two strings. I'm getting either 1ft or 2ft spacing on the calculator.
You doing 2" spacing on the MT? Thanks


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

1/2" pvc and in the calculator you have too set it as it was a 360 degree tree so I did 24 string too make it a full tree so I got right calculations and I put 7.75 for pole I also did 4' base my center pole is 8' but once I add the top platform too it and the eye hooks it is just under 8' from ground too where the pvc legs would connect and I have another eye hook at end of legs too connect too eye hooks on top platform so actually less than 8' from ground up


Reply
Kev7274
Posts: 2037
Topic starter
(@kev7274)
Famed Member
Joined: 13 years ago

Thanks Taz, I put in those numbers and it still needs one more number to calculate. Length of strings,radius,diameter?


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

changed up my last post hope that helps

Kev7274 wrote:Thanks Taz, I put in those numbers and it still needs one more number to calculate. Length of strings,radius,diameter?

Reply
Kev7274
Posts: 2037
Topic starter
(@kev7274)
Famed Member
Joined: 13 years ago

Yep,that helped alot. Here's what I am getting...

Avg Length of strings: 7.75
Circumference of Base: 12.56 units
String Spacing on Ground: 0.52333333333333 units


Reply
Page 1 / 3
Share: