Last year I used the round pixels taped to 1/2" pvc pipe. I used this clip for the top of each pipe and this for my topper.
Here in Georgia, pvc pipe just doesn't do well in the hot sun. Even during the winter months. I made the mistake of storing the 24 pieces out in the sun before hand (several months before hand) and several pieces warped. Also spacing was an issue. I am going to solve this by re-using the pipe on another project and go with pixel strips to get exact spacing.
I was looking at possibly using this setup for next year. However I am open to some DIY solutions. In some ways, I may spend the money since time is not on my side for building. Maybe there are some easy ways to accomplish the above without purchasing store bought stuff?
The tree I had last year was a 180 tree. Will be this year as well. I used a 1/2" pvc pipe ring that was elevated. Has anyone used the combo above with a pvc pipe ring? I would think the pull on the pipe would be an issue? What do you think?
Love to hear your ideas.
Thanks
Robert
www.burtonchristmaslights.tk
https://www.facebook.com/BurtonChristmasLights
Oh I am very familar with James stuff! Great stuff and great ideas!!!
The issue here is that I have already bought a $35.00 hook head. Already also invested $18.00 in pvc pipe hooks. Might try and reimagine those with the pixel strips somehow. I also used the "Monkhouse - Portable Hole" as well. Since it is a 180 tree and only about 10ft, really don't need any guy wires with that 60 to 75lb weight at the bottom 😉 The darn thing was so bulky and heavy... I drug it 10ft off into the woods and left it there for next year ! 😉
Either way, I am using some pixel strips. Can't see it in my videos... because many washed out... but really want to get those pixels lined up better than last year.
Robert, if you get up my way, I am building several trees and I have multiple hook heads and toppers including home built, commercial built ($35), some from James and another from Holiday Coro. Feel free to come by and we can discuss them all.
Hey Jim. What are you doing for the base? What are your dimensions?
