Drain strainer hook...
 
Notifications
Clear all

Drain strainer hook head

22 Posts
12 Users
0 Reactions
12.2 K Views
imbluenote
Posts: 1615
Topic starter
(@imbluenote)
Noble Member
Joined: 15 years ago
[#37004]

I am building about a 9ft gece pixel tree this year. Since my tree isn't going to be very tall I didn't want a very wide hook head at the top. Not sure what made me think of it, but I thought of using a cast iron drain strainer.

Low and behold menards carries a 8 in strainer that has 32 holes around the circumference of the strainer evenly spaced. I am using 16 strings on James' mounting strips and the spacing between the holes on the strainer is perfect. I got 5/16" j hooks and lock nuts to hold the hooks in place. The flat of the strainer is the top and the bottom is the concave part of the strainer hole which the lock nut nestles in nicely.
To mount to the pole the bottom has a 1 1/4 in pipe flange and the top is a 3/4 in flange for the tree topper.
Overall it probably cost about the same (maybe a little less if something is on sale or they have their 11% rebate thing at menards) but a good option since the holes are already drilled and evenly spaced. Also it is a local option so no shipping costs (though I guess there would be sales tax) or time worries if it is close to show time. Plus this is DIYC right?!


21 Replies
Posts: 482
(@jcmarksafb)
Honorable Member
Joined: 15 years ago

Great thinking!! I like it a lot.
John


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

I used the same hooks for years. I mounted them going up with the hook facing in. My thought was it was least likely for the strings to come off it if things got loose or something broke.


Reply
cnbales
Posts: 503
(@cnbales)
Honorable Member
Joined: 15 years ago
Reply
Posts: 1168
(@keith-r)
Noble Member
Joined: 19 years ago

I like it!


Reply
Page 1 / 5
Share: