Drain strainer hook...
 
Notifications
Clear all

Drain strainer hook head

22 Posts
12 Users
0 Reactions
12.2 K Views
imbluenote
Posts: 1615
Topic starter
(@imbluenote)
Noble Member
Joined: 15 years ago
Skunberg wrote:I used the same hooks for years. I mounted them going up with the hook facing in. My thought was it was least likely for the strings to come off it if things got loose or something broke.

I thought about that. It would be a little cleaner look, I just wasn't sure when the pipe was screwed in how much of a pain it would be getting the strands in there. Plus there will be some tension on the strands at the bottom so they won't be flapping in the wind (I hope!). I will try it though when testing time comes around.

Thanks to every one for the kind words as well.


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago
imbluenote wrote:I thought about that. It would be a little cleaner look, I just wasn't sure when the pipe was screwed in how much of a pain it would be getting the strands in there. Plus there will be some tension on the strands at the bottom so they won't be flapping in the wind (I hope!). I will try it though when testing time comes around.

Thanks to every one for the kind words as well.

I used wide zip ties as a loop to put over the hooks so the strings didn't touch the topper. The drain covers at my menards here only have 30 holes 🙁


Reply
imbluenote
Posts: 1615
Topic starter
(@imbluenote)
Noble Member
Joined: 15 years ago

Hmm..it was a while ago when I bought it, maybe they changed their design? I am pretty sure it was Sioux chief model 846-s19pk. I have to go to menards soon I'll check the ones here.


Reply
Posts: 134
(@some-guy)
Estimable Member
Joined: 14 years ago

This. is. brilliant.


Reply
imbluenote
Posts: 1615
Topic starter
(@imbluenote)
Noble Member
Joined: 15 years ago
Skunberg wrote: The drain covers at my menards here only have 30 holes 🙁

I had to go this morning to get a battery for the garage door opener (it's always something!), and checked out the strainer.

I was wrong on the size I used, it is the 8" NOT the 8 7/8" strainer. The correct part number is 8" Sioux Chief Cast Iron Strainer part # 846-S17PK menards sku 685-3798 for what I used. I counted twice to make sure and it had 32 holes. I agree that the 8 7/8" has 30, which does seem counter intuitive given the large diameter. Though I suppose it would work depending on the number of strings and if you are during a full tree or 180/270 deg tree.


Reply
Page 2 / 5
Share: