Roger,
Your confidence overwhelms me!!!
I'm not worried. The planning is done (OK, except for the material for the arches) and it's now all in the execution. You should see the folder of notes I carry with me, in addition to the thumb drive that contains all the spreadsheets, plans, etc.
I don't envy your sequencing, Mr. 512-channels-out-of-the-gate!!!!!
😉
tlorek wrote:Roger,Your confidence overwhelms me!!!
Just remember the formula...some things ARE set in stone... 🙂
tlorek wrote:I don't envy your sequencing, Mr. 512-channels-out-of-the-gate!!!!!
😉
You need to remember, I'm not using 512 channels. I have one extra system, just for a "back-up", in case of unforeseen failure. So that leaves me 384 channels. I don't think I'll use all of them, as I just don't have quite enough lights. However, a LOT of the channels are going to be for individual lights - spotlights, strobes, etc, which may only come on a few times a night. So, it seems like a lot, but really, it isn't.
Plus, I have the added advantage of being able to do most of my sequencing at work. I'm basically a "fireman" - I only get called to action, when a machine is down. There are nights I am on the floor, at most 10% of the night. That's a big plus. No one WANTS to see the Fireman, in the course of his work, right??!!??
I'll admit, most of my stuff takes longer, as my arches require 150 lights per segment, so I have to cut down 100 light strings, and make 150 light strings, and my house is 120 years old, so the windows are HUGE compared to most (83" tall), so making the frames is tough. Plus, I use 4 colors on each window, so I have to make super strings, first, and I have 16 windows. The windows alone take 64 channels!! That's two daughter boards, and 16 SSRNeons...
I'm sure you'll make it, it was all in jest. But, I still would bet it takes a bit longer than you have planned for...although I have been wrong before...
R
If Christmas were next week. I'd be ready to go. However you are never done. I was "ready for setup" last year at this time, but was still "tinkering" the day before I took them DOWN for the year.
bmcgeeny wrote:If Christmas were next week. I'd be ready to go. However you are never done. I was "ready for setup" last year at this time, but was still "tinkering" the day before I took them DOWN for the year.
I WILL NEVER BE READY...I WILL MAKE CHANGES AT THE LAST MINUTE.....
...I am in so much trouble! lol
You guys are scaring me. I've only just received my 24LV boards... let alone got a single blinky operational....
🙁
LabRat wrote:You guys are scaring me. I've only just received my 24LV boards... let alone got a single blinky operational....🙁
😯
LabRat wrote:You guys are scaring me. I've only just received my 24LV boards... let alone got a single blinky operational....🙁
Now you understand what we mean by the CLAP! :rolleyes:
you guy scare me too I only have a lowes magic of christmas box lol
But it sure is fun to read your posts and learn from the big boys i hope to have a vixen or grinch one day even tho i made a grinch my grinch>>> 
UPDATE - I got the poles today, and they were sent yesterday! But, from Illinois, so it's pretty darn close.
They look great! MUCH better than I expected them to, and look plenty strong. I will be taking some out, and putting them together on the deck, in a little bit, to get an idea of how many I need to put together. I plan on making my own "discs" for guy lines, with the plasma cutter, so I can make them fairly tight.
And I was right on the manufacturer...if I can find out who "49608" is - that's what it says - "mfr 49608". They do look well made, though - time will tell...
R
LabRat wrote:You guys are scaring me. I've only just received my 24LV boards... let alone got a single blinky operational....🙁
2010 is not far off!

