Live tree as a Mega...
 
Notifications
Clear all

Live tree as a Mega Tree?

16 Posts
10 Users
0 Reactions
7,484 Views
51fordf2
Posts: 1280
Topic starter
(@51fordf2)
Noble Member
Joined: 18 years ago
[#7304]

Hi, all...

Not sure if I'll get my 20+ foot tree done for this year. Too many other plans. However, I was wondering if anyone had ever used a live tree? I have two 18 foot Blue Spruce trees, about 15 foot apart. I'm thinking maybe snaking a pole down right next to the trunk, and lashing it every few feet to the trunk. It wouldn't be a full circle, just a half-circle, but with two trees, side by side, done up the same, it might be very appealing. The diameter of the trees at the bottom are probably 12 foot. Thought maybe a "hoop" secured around the bottom a foot or so up, like any other mega tree, to hold the bottom of the light strings, and probably use 1/8" guy wire, to zip tie the strings to, or possibly, just use the strings themselves, without any guy wires.

Think it's feasible? Sure would save me a lot of time, as I am planning on lighting the trees regardless - might as well have a psuedo-mega tree...

Roger


15 Replies
piesrule58
Posts: 443
(@piesrule58)
Honorable Member
Joined: 19 years ago

Sounds like a great idea to me. There is a lot to be said for keeping it simple. As for the guy wires, I don't think you need them. The lights seem to hold up fine without them.


Reply
WWNF911
Posts: 1722
(@wwnf911)
Noble Member
Joined: 19 years ago

I agree about the guy wires. They're only needed to hold the Mega tree up against the elements. No chance your trees will come down. 🙂

You only have to find a way to support your light strings up top. The hoop at the bottom is up to your preference as well. Most just use it like you said to secure lights but also to simulate the shape of a tree. With yours,.... just follow the tree. I've also seen others secure the strings to the ground with stakes. (But that makes the pseudo tree just look as if it has no trunk by having the lights go all the way to the ground.) I think they'll look great. Hope you post a pic when they're done Roger.

Leon


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

I'd love to have a Mega Tree but my front yard is not that large and I already have a fruitless Mulberry smack in the middle. It loses it leaves around Halloween or so and I thin out a lot of the branches soon after (btw - fruitless Mulberries generally get all branches cut off every year here in CA...) and I string my lights around those branches for the show. It looks pretty neat to me anyway.

I ran 3 colors (Red/Green/White) of C6 LEDs wrapped around about 12 branches. Of course you have an evergreen so you'll have the leaves (well - needles) on the tree so they might not show as well...

Brian


Reply
51fordf2
Posts: 1280
Topic starter
(@51fordf2)
Noble Member
Joined: 18 years ago
budude wrote:(btw - fruitless Mulberries generally get all branches cut off every year here in CA...) and I string my lights around those branches for the show. It looks pretty neat to me anyway.
Of course you have an evergreen so you'll have the leaves (well - needles) on the tree so they might not show as well...

Brian

Brian - "fruitless" Mulberry? Never heard of it. We have a Mulberry that's about 30' tall. We pick up the berries, and freeze them to feed the two Box Turtles all winter long. They love it!

I don't plan on wrapping the trees, which I normally do (big hassle!). I intend to bring the strings straight down, like a mega tree, that's why I'm thinking hoop to hold the bottom of the strings. And as Leon mentioned, I'm trying to figure out how to secure them at the top. That's why I was thinking snaking a pole next to the trunk. After looking this morning, that might be tough, unless I shorten the pole to around 6 foot long, as there are LOT'S of branches to try and get around. But 6' is do-able, I think. Then I could put a ring with hooks on it. I even thought about one of those big zip ties, the kind they use for ducting, and just put the strings on it, and zip it loosely around the top. I'm WIDE open for ideas, on holding the strings at the top!

Here's a few pics of the trees...I'm thinking about trimming the first foot or bit more of branches from the bottom. Give it more a Christmas tree look.

Thanks all,

Roger

trees03

Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

Oh gees, I wish mine was that small! I live in a townhouse and my front yard is only about 20 feet deep. I’ve got a 40 foot pine nearly in the middle of the yard. Its taken three years to find anything that worked acceptable.

The first year someone told me to just tie a loop of wire to the end of the string and place it over the top of the tree. Forty feet is a long way to reach with a pole holding up the weight of a lights string and trying to hit an area of only a foot or so, though that pain was nothing compared to trying to get that loop back off again.

The second year I figured that I would use two strings and just run it up and over to the other side like a lot of people do with their mega tree. This just doubled the weight and the top couple of feet of tree are about as strong as a two year old. The first wind jumbled the lights up and made it look like Charlie Brown decorated it.

Last year someone suggested at a local mini that I tie a string to the end of the light string and pull it up from the other side. I tied the string to a safety pin attached to a tennis ball and pitched it over the top of the tree with a launcher that I use for the dog. That in itself is a learned talent that works pretty well after the comical start. Then it was pretty much a matter of pulling on the string while snapping the lights string to lighten it up a bit. When it was up, I just tied the string to the tree trunk until it was time to tare it down. At tare down, I just cut the string and snap the lights a bit and it all comes down.

So far because of the weight, I’ve only been using eight four color super strings. The string method worked so well that I may be able to add more to fill it out a bit better. It’s been requiring a whole day to get the lights up in this tree but I think I’ve learned enough that it won’t be nearly as tough this year. I have an idea for a bazooka like ball launcher that should increase my accuracy and save the wear and tear on my arm.

An eighteen foot tree would be a piece of cake!:p


Reply
klanger
Posts: 739
(@klanger)
Prominent Member
Joined: 20 years ago
ErnieHorning wrote: I have an idea for a bazooka like ball launcher that should increase my accuracy and save the wear and tear on my arm.

An eighteen foot tree would be a piece of cake!:p

Sounds like the need for a lemon gun;)


Reply
kmc123
Posts: 824
(@kmc123)
Prominent Member
Joined: 19 years ago

I bought 5 of these (Gave 1 to my dad and 1 to my brother):

I got the rifled barrels for the potatoes and the tennis ball barrels as an add on.

We like to take the break and shake glow sticks apart and pour them down the barrel on top of the tennis balls and fire them at night - they are like tracer rounds!!! The glow chemicals get all in the ball fuzz and when they hit something, it leaves it all over it!

It would be great for those really tall mega tree uses! 😎


Reply
klanger
Posts: 739
(@klanger)
Prominent Member
Joined: 20 years ago
kmc123 wrote:I bought 5 of these (Gave 1 to my dad and 1 to my brother):

I got the rifled barrels for the potatoes and the tennis ball barrels as an add on.

We like to take the break and shake glow sticks apart and pour them down the barrel on top of the tennis balls and fire them at night - they are like tracer rounds!!! The glow chemicals get all in the ball fuzz and when they hit something, it leaves it all over it!

It would be great for those really tall mega tree uses! 😎

Oh boy, I want one of those.


Reply
Macrosill
Posts: 9740
(@macrosill)
Member
Joined: 20 years ago

That thing looks dangerous but "Danger" is my middle name, baby!


Reply
Page 1 / 2
Share: