Thanks guys, I have found the problem. It is NOT the Grinch. After some trial and error I have found that the Ren C is the problem. When a sequence is...
Thanks guys, I am using 110v incandescents. Most of the channels that are miss-behaving are in the Mega Tree. All light wires are approx 8mtrs long an...
Problem solved. My show computer has 2 com ports. I took the lead from com 1 and put it into com 2 and bingo, we now have Blinky flashy.
MartinMueller2003 wrote:In that case, look at "Alternative Option 2" on this page for Zero Cross detection: If you are doing DC SSRs, you do not nee...
Do I need to have the shunts on J1 and J2?
MartinMueller2003 wrote:Yes you need to give it 5V power. However, if you have the 64Xc then it has the voltage regulator and zero crossing detection ...
Thanks Gary, I got my son who is an electrician to check the voltages. It has 110v at the input and 12.6v at the out put, but still no light at D3. It...
Thanks guys. So all I need is a serial connection from Comm port 1 on computer to RJ45 in on Renard? Do I need to also hook up 5v power to the Renard ...
