One other thing - you didn't indicate what you would be using for lights. If you're using the old-school super strings with 3-5 colors with minis - then yeah - that's a lot of mass that will be swaying in the wind. But if you're using pixels then you're looking at much less mass and there will be less swaying of the pole and less inertia to pull the whole thing over if it started tipping.
For my setup, which is about 19', I have my pixels tied to 1/16" cable. Now - individually, they don't exert that much pull, but when you have 30, you are talking probably a couple hundred pounds of pull down so they act like guy wires. Add in the 4 to 8 tie downs at the base and that thing just isn't going anywhere. I went with a fairly stout 2" main pole and 1-1/2" center pole. The center pole does not thread into the main pole - it slides in and is bolted through both pipes to hold it there. I suppose it could possibly shear the bolt but worse case is the pole would fall straight down into the main pole but would not fall over.
I do not have a star at my top but plan to eventually. I'm not worried about it causing issues with the tree itself but more making sure it stays on the top instead of flying away.
I always had a question concerning the rebar mounts. How exactly do you get 4' long rebar out of the ground once the season is done?
Sent from my iPad using Tapatalk




