I'm also in SoCal and use a Portable Hole II with three guy wires, mainly for peace of mind. My 15 foot tree does not move, even in the 40 mph gusts we get from the Santa Anas at that time of year. 3 years going strong.
Josh
Another portable hole II user. Best thing I have ever done. I no longer have to use guy wires, but do put 4 iron stakes at each corner. I watch my lights sway in the wind, but the pole never seems to move. I'm about 19ft total counting my star on top.
A concern I have about the portable hold ii is this: I have read people ask about connecting 2 pieces of 10 foot poles together and if it is ok to have the coupler near the bottom. Many responses have been the coupler should be near that top but that even better get one continuous pole instead of multiple pieces coupled together. With this portable hole ii, isnt it essentially a coupler at the very bottom, meaning that is the weakest point?
I would never worry about a coupler at the bottom. The bottom of the tree does not move. It is the top that gets all the wind and sways. Some folks use a hinge at the bottom for ease of putting it up. The portable hole / JUMP pole uses an iron pipe screwed into another iron pipe at the bottom. In my experience I have had poles bend and get bent into a permanenet curve and the one time I tried a coupler at the 10 foot height, the tree blew over from the guy wire stakes being pulled out of very wet soil. I had guy wires to both 10ft coupler area and to the very top (about 15 ft). Worrying about the bottom of the tree does not make sense to me. My mega trees got blown over or at least bent every year until I built my Jump pole. Now after 3 seasons of use I still say it was one of the best decisions I ever made. It is not cheap and it can take some effort to acquire everything needed, but well worth the effort. One piece that gave me fits was getting the threads out of couple of the iron couplers so that the inner poles would slide in and out. Finally had a client with a machine shop take them out. Took him less than 15 min after I had spent a couple of hours trying to grind the threads out.
My front yard is fairly small, so went with a permanent hole.
I have a 4' deep hole, steel anodized 2.5" pipe, buried with 6 bags of concrete. I use a small valve cover over the top of the hole, at soil level, which allows this to disappear in the grass during most of the year. I also use as a flagpole mount during the summer. This allows a 20' pole without any guy wires.
BTW, my soil, if you can call it that, is rock bound together by clay. Digging the hole resulted in a bell shaped hole as some rather large rocks were removed during the dig.
