Mega Tree aspect ra...
 
Notifications
Clear all

Mega Tree aspect ratio question

16 Posts
11 Users
0 Reactions
6,587 Views
Posts: 22
Topic starter
(@lwillisjr)
Eminent Member
Joined: 11 years ago
[#42220]

I am constructing a flat mega tree. I am using 12 pixel ribbon strips that are 16.4 feet each. So my tree will be 16.4 feet tall obviously. I am wondering if there any suggestions in regards to how far apart do I space each pixel ribbon at the base of three. I didn't know if there was some rule of thumb that is more pleasing to look at. I was initially thinking of spacing the ribbons 1 foot apart at the base which would then make the tree 11ft x 16ft (W x H). This seems to me may the tree will be to wide at the bottom and I should reduce the spacing.

Thoughts?


15 Replies
Posts: 116
(@jcasterline)
Estimable Member
Joined: 15 years ago

Make a mock display, maybe lay it on the floor. If it looks right, go with it.
Ive been thinking about the dimensions for mine. my thoughts focus on what the colors or patterns in the show. If the pixels are closer together, the pictures/patterns will look better. If you want 11 Ft wide, consider more strips.
It sounds like your gonna use a 5 meter strip. Are there any good deals on those out there?
How many pixels are you planning to use?
I am torn between strips and strings. I want 20 strings of 150 pixels in strips, but my budget will probably leave me with 10-15 strands of 50 pixels.
Whatever you come up with, I hope you post some pictures. I am always looking for inspiration.


Reply
lightsonmontague
Posts: 363
(@lightsonmontague)
Reputable Member
Joined: 11 years ago

I'd have to say it depends on what the viewing distance
Is 30ft or less 6" over 50 I'd say you could do 12. Imo

Sent from my iPhone using Tapatalk


Reply
Posts: 486
(@uncledan)
Honorable Member
Joined: 11 years ago

That is exactly how I constructed my tree last year. My tree is 30 feet from sidewalk and most viewers are 60+ feet away. It worked well for me.


Reply
Posts: 116
(@jcasterline)
Estimable Member
Joined: 15 years ago

That did work out awesome. I'm drawn to that mega tree. Great display

Sent from my iPhone using Tapatalk


Reply
Posts: 22
Topic starter
(@lwillisjr)
Eminent Member
Joined: 11 years ago

Thanks for all the comments. I read somewhere a suggestion for a mega tree base to not exceed half its height. So for my 16ft tree I think I'll start off with an 8ft base.

I do plan to use 5m ribbons of WS2811. I bought my last group of ribbons from RaY Wu's site at aliexpress. In my display I use the ribbons that have 1 IC per every 3 LEDs. They are marketed as 30 LEDs per meter with 10 pixels per meter. They don't have quite the resolution as the ribbons where each LED is a pixel, but these are cheaper and I have seen several trees with these and I am happy with them.

I also have been debating on what material to use to construct the tree and I have settled on using 1/2 metal conduit poles. They are strong and only $2.25 per 10ft section. I will try to take some pictures of the tree in construction and will post here later.


Reply
Posts: 116
(@jcasterline)
Estimable Member
Joined: 15 years ago

Metal conduit seems to be a good idea. I was thinking pvc until I consulted a friend at the hardware store.
If you are really gonna make a flat tree, you could use wooden strips, maybe.

Sent from my iPhone using Tapatalk


Reply
Posts: 22
Topic starter
(@lwillisjr)
Eminent Member
Joined: 11 years ago

I think the conduit would be lighter and just as strong. I'll post some pictures once I start construction.


Reply
Barnabybear
Posts: 1583
(@barnabybear)
Noble Member
Joined: 15 years ago

Hi, mine is 4:1 i.e 4 high to 1 wide at the base (an old tree - 360 deg). This was based on 42 pixels per strip @ 4" spacing & 1" spacing at the top 7" spacing at the bottom so I had 4" wide x 4" high in the middle. Not good for video though.


Reply
Posts: 138
(@brettjm)
Estimable Member
Joined: 13 years ago

I'm also making a flat tree this year and would be interested in how you construct yours. Keep us posted on your design.


Reply
Page 1 / 2
Share: