Traneman wrote:Geeesh,Now that makes me think I sould put the spirals on the inside instead of the outside.
I have mine setup for the outside.
Does it matter?
Should I change it?
It is your preference, but I put my spirals on the outside. The lights from the vertical strings help keep the spirals in place, I don't use any zip ties anywhere except at the bottom to hold them to the bottom ring.:biggrin:
Plus - X2 on the ebay seller WayneJ ponted out. He has good stuff at great prices, and ships very quickly!!
If you used 1/16" cables on the light ring up, what size cable would be appropriate for the winch?
11Bravo wrote:If you used 1/16" cables on the light ring up, what size cable would be appropriate for the winch?
That would depend on the total weight of all the strings and cables.
Brian
Galvanized Aircraft Cable
Cable Size, 1/16 Inch
Safe Working Load 96 lbs
Breaking Strength 480 lbs
I'm not getting enough info. Lets try to get on the same page. I have the same 1/16th cable with 4 strings of minis zip tied to them (red, green, blue, white) times 16 cables. Plus I have 8 140ct minis spiraled on top of these. So the 1/16th cable carries the weight of itself, 4 strings of minis and a half string of 140ct (8 140ct divided by 16 cables). So this weight times 16 cables (plus head, hardware, topper, etc.) is the weight for the crankup cable to pull up. So weight your cables, strings, cables, topper, etc. add it up and that's how heavy a cable you need to pull it up. I'd up size the cable at least 1 size bigger as you don't know what you may add in the future.
Brian
I use 1/8" galv cable on my winch and have never had any problems. I am raising 32 - 3 color mega strings, 8 - 1/16" support strings, 16 spiral strings and 24 strobes. The weight of the 1/16" support cables is neglible.
Wow ... work load limit of 1/8 is 400 lbs :omg: ( thats some tough stuff )
http://www.wwewirerope.com/aircraftcable/
for break strength and work strength
You sure about your work load for 1/8" cable being 400? Looks to me that the rating for 1/16 is 480, while the 1/8 is 1700.
I know that I use 7/19 stranding - 1/8" galvanized cable for my tree and the work load rating on it is 2200 lbs. from where I buy it.
