Going to add a spiral element to my Mega Tree this year. To help support the spirals I'm going to support each of my vertical slices with 1/8" cable which should, I hope, support the spirals. Went out checking prices this morning and found 1/8" at .18/ft and 1/8" with clear plastic coating at .09/ft. Is there a reason I shouldn't by the cable with the plastic coating?
1/16" vinyl coated is all you need.
http://www.jamesfamilychristmas.com/index.php?option=com_content&task=view&id=39&Itemid=36
Wayne, those were pretty sweet-lookin' welds on those megatree pieces! :thup:
Wayne, what did you use for hardware at the cable ends?
gassy wrote:Wayne, what did you use for hardware at the cable ends?
30325T13 http://www.mcmaster.com/#catalog/118/1416/=jwsghe
3003T142
http://www.mcmaster.com/#catalog/118/1433/=jwslyz
And this ebay seller has the best prices on everything (I have bought a lot of stuff from them)
1/16" 7/7 vinyl coated and 1/8" S hooks on top, the turnbuckles on the bottom, and the loops made with the clamps.
http://www.ebay.com/sch/pambinaimpex/m.html?_nkw=&_armrs=1&_from=&_ipg=25&_trksid=p3686
Wait till tomorrow and I can dig out some of them and get a picture if you like.
dirknerkle wrote:Wayne, those were pretty sweet-lookin' welds on those megatree pieces! :thup:
Thanks, too bad they are 20' in the air. LOL
Wayne J wrote:30325T13 http://www.mcmaster.com/#catalog/118/1416/=jwsghe
3003T142
http://www.mcmaster.com/#catalog/118/1433/=jwslyzAnd this ebay seller has the best prices on everything (I have bought a lot of stuff from them)
1/16" 7/7 vinyl coated and 1/8" S hooks on top, the turnbuckles on the bottom, and the loops made with the clamps.
http://www.ebay.com/sch/pambinaimpex/m.html?_nkw=&_armrs=1&_from=&_ipg=25&_trksid=p3686Wait till tomorrow and I can dig out some of them and get a picture if you like.
No need for pictures, thanks for the info/links though.
gassy wrote:No need for pictures, thanks for the info/links though.
I agree with Wayne. I bought my 1/16 in cable and clamps from this guy. Turn around was fast.
Geeesh,
Now that makes me think I sould put the spirals on the inside instead of the outside.
I have mine setup for the outside.
Does it matter?
Should I change it?
Traneman wrote:Geeesh,Now that makes me think I sould put the spirals on the inside instead of the outside.
I have mine setup for the outside.
Does it matter?
Should I change it?
I don't think it matters really. You still get the same effect.
