25' Mega-Tree Advic...
 
Notifications
Clear all

25' Mega-Tree Advice

15 Posts
11 Users
0 Reactions
6,169 Views
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 19 years ago

I built my 24' tree with 2 1/2" X .125" aluminum tube. Two sections with a solid aluminum coupling in the middle. I also have three sets o guy wire to keep it straight. The tube can hold lots of weight, but it is imperative it stays straight to do so.

www.jamesfamilychristmas.com/images/stories/pictures/Town%20Mega%20Tree/megatree%20topper.jpg

http://www.jamesfamilychristmas.com/index.php?option=com_content&task=view&id=39&Itemid=36


Reply
Posts: 36
Topic starter
(@mwalz)
Trusted Member
Joined: 13 years ago
Wayne J wrote:I built my 24' tree with 2 1/2" X .125" aluminum tube. Two sections with a solid aluminum coupling in the middle. I also have three sets o guy wire to keep it straight. The tube can hold lots of weight, but it is imperative it stays straight to do so.

www.jamesfamilychristmas.com/images/stories/pictures/Town%20Mega%20Tree/megatree%20topper.jpg

http://www.jamesfamilychristmas.com/index.php?option=com_content&task=view&id=39&Itemid=36

Where did you find aluminum pole? I have looked but i always end up at flag poles.


Reply
Posts: 124
(@frankaz)
Estimable Member
Joined: 14 years ago

Keep an eye on craigslist for something light old street light poles, electrical or ham radio towers. I paid $200 for a 65 ft ham radio tower (crank up version)


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 19 years ago
mwalz wrote:Where did you find aluminum pole? I have looked but i always end up at flag poles.

Steel and aluminum supply distributors. I have 3 local here.


Reply
FIRECOP252
Posts: 1292
(@firecop252)
Noble Member
Joined: 16 years ago

I used steel poles 1 1/4 for it. You could do 1 1/2 even for more strength and couple it down at the second and third sections depending on what length poles you use. I bought mine at Lowes and it was 10 ft sections so i just used a coupler. my hookheads were 1 1/2 so I just got a reducer. Mine had never moved or swayed. I mount mine in a "portable hole 2" and have 1/8" guywires. Hope this helps.


Reply
Page 3 / 3
Share: