Converting Megatree...
 
Notifications
Clear all

Converting Megatree to Pixels

4 Posts
2 Users
0 Reactions
2,296 Views
Posts: 161
Topic starter
(@msiebri)
Estimable Member
Joined: 13 years ago
[#29322]

After adding pixel arches around my megatree this year, I want to convert the megatree to pixels for next year. The 48 LED strings I use now are 33' long folded over, so each segment is about 16.5' long. I would like to use 5m strips to replace these, as this will allow me to reuse my existing center pole and base ring with no changes, and I don't have to spend a huge amount of time getting the spacing correct.

I used these strips for my arches, would they work well for the megatree also, or should I look at something different? They worked very great for my arches.

http://www.aliexpress.com/store/product/5m-DC12V-60leds-m-20pcs-ws2811-ic-meter-20pixels-led-digital-strip-IP68-waterproof-in-silicon/701799_1142314497.html

I am also using SanDevices controllers for the arches and they have worked great, so I want whatever I get to work with those same controllers.

Thanks in advance for any guidance!


3 Replies
Posts: 167
(@bigbenamerika)
Estimable Member
Joined: 13 years ago

How did you do the arches with those pixels?
Don't look like you could bend them a lot


Reply
Posts: 161
Topic starter
(@msiebri)
Estimable Member
Joined: 13 years ago

I built them according to this thread, they run inside the translucent tubing. They give a really nice diffused look.

http://doityourselfchristmas.com/forums/showthread.php?27542-HDPE-Arches


Reply
Posts: 167
(@bigbenamerika)
Estimable Member
Joined: 13 years ago

Thx for the link!!!


Reply
Share: